Subregional Plan Map - Detail Plans - Open Data

COMPLETED 2010. The data was converted from the most recent (2010) versions of the adopted plans, which can be found at https://cms3.tucsonaz.gov/planning/plans/ Supplemental Information: In March 2010, Pima Association of Governments (PAG), in cooperation with the City of Tucson (City), initiated the Planned Land Use Data Conversion Project. This 9-month effort involved evaluating mapped land use designations and selected spatially explicit policies for nearly 50 of the City's adopted neighborhood, area, and subregional plans and converting the information into a Geographic Information System (GIS) format. Further documentation for this file can be obtained from the City of Tucson Planning and Development Services Department or Pima Association of Governments Technical Services. A brief summary report was provided, as requested, to the City of Tucson which highlights some of the key issues found during the conversion process (e.g., lack of mapping and terminology consistency among plans). The feature class "Plan_boundaries" represents the boundaries of the adopted plans. The feature class "Plan_mapped_land_use" represents the land use designations as they are mapped in the adopted plans. Some information was gathered that is implicit based on the land use designation or zones (see field descriptions below). Since this information is not explicitly stated in the plans, it should only be viewed by City staff for general planning purposes. The feature class "Plan_selected_policies" represents the spatially explicit policies that were fairly straightforward to map. Since these policies are not represented in adopted maps, this feature class should only be viewed by City staff for general planning purposes only. 2010 - created by Jamison Brown, working as an independent contractor for Pima Association of Governments, created this file in 2010 by digitizing boundaries as depicted (i.e. for the mapped land use) or described in the plans (i.e. for the narrative policies). In most cases, this involved tracing based on parcel (paregion) or street center line (stnetall) feature classes. Snapping was used to provide line coincidence. For some map conversions, freehand sketches were drawn to mimick the freehand sketches in the adopted plan. Field descriptions Field descriptions for the "Plan_boundaries" feature class: Plan_Name: Plan name Plan_Type: Plan type (e.g., Neighborhood Plan) Plan_Num: Plan number ADOPT_DATE: Date of Plan adoption IMPORTANT: A disclaimer about the data as it is unofficial. URL: Uniform Resource Locator Field descriptions for the "Plan_mapped_land_use" feature class: Plan_Name: Plan name Plan_Type: Plan type (e.g., Neighborhood Plan) Plan_Num: Plan number LU_DES: Land use designation (e.g., Low density residential) LISTED_ALLOWABLE_ZONES: Allowable zones as listed in the Plan LISTED_RAC_MIN: Minimum residences per acre (if applicable), as listed in the Plan LISTED_RAC_TARGET: Target residences per acre (if applicable), as listed in the Plan LISTED_RAC_MAX: Maximum residences per acre (if applicable), as listed in the Plan LISTED_FAR_MIN: Minimum Floor Area Ratio (if applicable), as listed in the Plan LISTED_FAR_TARGET: Target Floor Area Ratio (if applicable), as listed in the Plan LISTED_FAR_MAX: Maximum Floor Area Ratio (if applicable), as listed in the Plan BUILDING_HEIGHT_MAX Building height maximum (ft.) if determined by Plan policy IMPORTANT: A disclaimer about the data as it is unofficial. URL: Uniform Resource Locator IMPLIED_ALLOWABLE_ZONES: Implied (not listed in the Plan) allowable zones IMPLIED_RAC_MIN: Implied (not listed in the Plan) minimum residences per acre (if applicable) IMPLIED_RAC_TARGET: Implied (not listed in the Plan) target residences per acre (if applicable) IMPLIED_RAC_MAX: Implied (not listed in the Plan) maximum residences per acre (if applicable) IMPLIED_FAR_MIN: Implied (not listed in the Plan) minimum Floor Area Ratio (if applicable) IMPLIED_FAR_TARGET: Implied (not listed in the Plan) target Floor Area Ratio (if applicable) IMPLIED_FAR_MAX: Implied (not listed in the Plan) maximum Floor Area Ratio (if applicable) IMPLIED_LU_CATEGORY: Implied (not listed in the Plan) general land use category. General categories used include residential, office, commercial, industrial, and other. Purpose Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Dataset Classification Level 0 - Open Known Uses Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Known Errors Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Data Contact John Beall City of Tucson Development Services 520-791-5550 [e-mail] Update Frequency Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.本数据集于2010年完成。数据由最新2010年版的已采纳规划转换而来，相关规划可通过以下链接获取：https://cms3.tucsonaz.gov/planning/plans/ 补充信息 2010年3月，皮马地区政府协会（Pima Association of Governments, PAG）与图森市（以下简称"本市"）合作，启动了规划用地数据转换项目。该项目耗时9个月，对本市近50份已采纳的社区、区域及次区域规划中的映射用地标识与选定的空间显性政策进行评估，并将相关信息转换为地理信息系统（Geographic Information System, GIS）格式。 本文件的进一步文档可从图森市规划与发展服务部或皮马地区政府协会技术服务部获取。应图森市要求，项目组已提供一份简要总结报告，其中梳理了转换过程中发现的若干关键问题，例如各规划间的制图与术语一致性缺失等。 要素类"Plan_boundaries"（feature class）表示已采纳规划的边界。要素类"Plan_mapped_land_use"（feature class）表示已采纳规划中映射的用地标识。部分信息是基于用地标识或区划推导得出，详见下文字段说明。由于此类信息未在规划中明确说明，仅可供本市工作人员用于通用规划用途。 要素类"Plan_selected_policies"（feature class）表示易于制图的空间显性政策。由于此类政策未在已采纳的地图中体现，仅可供本市工作人员用于通用规划用途。 2010年，受雇于皮马地区政府协会的独立承包商Jamison Brown创建了本文件：针对映射用地，按照规划图示数字化边界；针对叙述性政策，按照规划描述数字化边界。多数情况下，该工作基于地块（parcel）或街道中心线（street center line）要素类进行描边，并通过捕捉（snapping）以确保线条重合。对于部分地图转换工作，还参照已采纳规划中的手绘草图进行描摹，以还原手绘效果。 字段说明 "Plan_boundaries"要素类的字段说明如下： Plan_Name：规划名称 Plan_Type：规划类型，例如社区规划 Plan_Num：规划编号 ADOPT_DATE：规划采纳日期 重要提示：本数据为非官方数据，特此声明。 URL：统一资源定位符（Uniform Resource Locator） "Plan_mapped_land_use"要素类的字段说明如下： Plan_Name：规划名称 Plan_Type：规划类型，例如社区规划 Plan_Num：规划编号 LU_DES：用地标识，例如低密度住宅区 LISTED_ALLOWABLE_ZONES：规划中列明的允许区划 LISTED_RAC_MIN：规划中列明的每英亩最低住宅数量，如适用 LISTED_RAC_TARGET：规划中列明的每英亩目标住宅数量，如适用 LISTED_RAC_MAX：规划中列明的每英亩最高住宅数量，如适用 LISTED_FAR_MIN：规划中列明的最低容积率（Floor Area Ratio, FAR），如适用 LISTED_FAR_TARGET：规划中列明的目标容积率（Floor Area Ratio, FAR），如适用 LISTED_FAR_MAX：规划中列明的最高容积率（Floor Area Ratio, FAR），如适用 BUILDING_HEIGHT_MAX：若规划政策有规定，则为最高建筑高度，单位：英尺 重要提示：本数据为非官方数据，特此声明。 URL：统一资源定位符（Uniform Resource Locator） IMPLIED_ALLOWABLE_ZONES：由用地标识或区划推导得出，未在规划中列明的允许区划 IMPLIED_RAC_MIN：由用地标识或区划推导得出，未在规划中列明的每英亩最低住宅数量，如适用 IMPLIED_RAC_TARGET：由用地标识或区划推导得出，未在规划中列明的每英亩目标住宅数量，如适用 IMPLIED_RAC_MAX：由用地标识或区划推导得出，未在规划中列明的每英亩最高住宅数量，如适用 IMPLIED_FAR_MIN：由用地标识或区划推导得出，未在规划中列明的最低容积率（Floor Area Ratio, FAR），如适用 IMPLIED_FAR_TARGET：由用地标识或区划推导得出，未在规划中列明的目标容积率（Floor Area Ratio, FAR），如适用 IMPLIED_FAR_MAX：由用地标识或区划推导得出，未在规划中列明的最高容积率（Floor Area Ratio, FAR），如适用 IMPLIED_LU_CATEGORY：由用地标识或区划推导得出，未在规划中列明的通用用地类别，通用类别包括住宅、办公、商业、工业及其他。 用途 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 数据集分类级别0 - 公开已知用途 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 已知错误 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 数据联系人 John Beall 图森市发展服务部 电话：520-791-5550 邮箱：[e-mail] 更新频率 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.