RO-C-RPCMAG-3-EXT2-CALIBRATED

Data Set Overview The data from the ROSETTA PLASMA CONSORTIUM (RPC) Fluxgate Magnetometer(MAG)was submitted by Ingo Richter (TM) for the RPCMAG team. The PI of the team is KarlHeinz Glassmeier. The data have been measured during the EXTENDED MISSION PHASE 2 (EXT2) of ROSETTA. Included are the following subphases: MTP0028 STP0103 from 20160405T23:25 to 20160412T23:25 MTP0028 STP0104 from 20160412T23:25 to 20160419T23:25 MTP0028 STP0105 from 20160419T23:25 to 20160426T11:25 MTP0028 STP0106 from 20160426T11:25 to 20160503T23:25 MTP0029 STP0107 from 20160503T23:25 to 20160510T23:25 MTP0029 STP0108 from 20160510T23:25 to 20160518T11:25 MTP0029 STP0109 from 20160518T11:25 to 20160524T23:25 MTP0029 STP0110 from 20160524T23:25 to 20160531T23:25 MTP0030 STP0111 from 20160531T23:25 to 20160607T23:25 MTP0030 STP0112 from 20160607T23:25 to 20160614T23:25 MTP0030 STP0113 from 20160614T23:25 to 20160621T23:25 MTP0030 STP0114 from 20160621T23:25 to 20160628T23:25 All magnetic field data are calibrated data. That means the data represent the 3 components of the magnetic field measured in physical units (nT). Data are given in instrument coordinates (LEVEL_A), S/C coordinates (LEVEL_B) or CSEQ coordinates (LEVEL_C). Calibration has been applied according to the Ground calibration results which means: temperature dependent offset calibration temperature dependent sensitivity calibration temperature dependent misalignment calibration Bad vectors have been removed. Any s/c generated noise and s/c caused residual magnetic fields are not eliminated. The ground temperature model for the sensor calibration has been improved (expanded for a wider temperature range down to 130 deg C) using long term temperature model obtained from flight data. The data are sorted by the sensor (OB: outboard sensor, IB: inboard sensor)and the measurement mode (M truncated!, Please see actual data for full text [truncated!, Please see actual data for full text]