4-m Image of the Northern Half of the Backscatter Intensity Mosaic of the Sea Floor off Northeastern Cape Cod from USGS Cruise 98015 (CAPENORTHMOS_GEO4M_WGS84.TIF, Geographic, WGS84)

This data set includes backscatter intensity of the sea floor offshore of northern Cape Cod, Massachusetts. The data were collected with a multibeam sea floor mapping system during USGS survey 98015, conducted November 9 - 25, 1998. The surveys were conducted using a Simrad EM 1000 multibeam echo sounder mounted aboard the Canadian Coast Guard vessel Frederick G. Creed. This multibeam system utilizes 60 electronically aimed receive beams spaced at intervals of 2.5 degrees that insonify a strip of sea floor up to 7.5 times the water depth (swath width of 100 to 200 m within the survey area). The horizontal resolution of the beam on the sea floor is approximately 10% of the water depth. Vertical resolution is approximately 1 percent of the water depth.
With backscatter intensity, the intensity of the acoustic return from the sea floor from the multibeam system, is a function of the properties of the surficial sediments and of the bottom roughness. Generally, a strong return (light gray tones) is associated with rock or coarse-grained sediment, and a weak return (dark gray tones) with fine-grained sediments. However, the micro-topography, such as ripples, burrows, and benthic populations also affect the reflectivity of the sea floor. Direct observations, using bottom photography or video, and surface samples, are needed to verify interpretations of the backscatter intensity data. The backscatter data have a weak striping that runs parallel to the ship's track. Some of the striping is the result of poor data return at nadir that appears as evenly-spaced thin speckled lines. Some striping is also due to critical angle effects, where the intensity of return varies as a function of the angle of incidence of the incoming sound on the seafloor (Hughes-Clark and others, 1997).

本数据集包含美国马萨诸塞州科德角北部近海海底的反向散射强度数据。该数据由美国地质调查局（USGS）编号为98015的科考航次于1998年11月9日至25日采集，采集过程采用多波束海底测绘系统。本次航次在加拿大海岸警卫队“弗雷德里克·G·克里德”号（Frederick G. Creed）科考船上开展，该船搭载的Simrad EM 1000型多波束回声测深仪（multibeam echo sounder）配备60个电子定向接收波束，波束间距为2.5°，可覆盖宽度达水深7.5倍的海底条带（本作业区内条带宽度为100~200米）。海底波束的水平分辨率约为水深的10%，垂直分辨率约为水深的1%。
反向散射强度指多波束系统采集得到的海底声学回波强度，其大小取决于表层沉积物性质与海底粗糙度。通常而言，强回波（浅灰色调）对应岩石或粗粒沉积物，弱回波（深灰色调）对应细粒沉积物。但微地形（如沙纹、潜穴及底栖生物群落）同样会影响海底反射特性。若要验证反向散射强度数据的解译结果，需借助海底摄影、视频观测及表层沉积物取样等直接观测手段。本反向散射数据存在与船舶航迹平行的弱条带噪声：部分条带噪声源于天底方向数据采集效果不佳，表现为均匀分布的细碎点状细线；另有部分条带噪声由临界角效应引发——当入射声波与海底的入射角变化时，回波强度也会随之改变（Hughes-Clark等，1997）。