An introductory review of thermal structure of subduction zones: II & III

This repository contains the output from a global suite of subduction zone models used in: "An introductory review of the thermal structure of subduction zones: II—numerical approach and validation", Wilson & van Keken, PEPS, 2023 and "An introductory review of the thermal structure of subduction zones: III—Comparison between models and observations", van Keken & Wilson, PEPS, 2023. Directories & Files The subdirectories of `vankeken_wilson_peps_2023.zip` are: `D80`: a reproduction of the "D80" Syracuse et al., PEPI, 2010 suite of subduction zones using Sepran `D80new`: a new global suite based on Syracuse et al., PEPI, 2010 but using a lower mantle potential temperature and an error function boundary condition and performed using both Sepran and TerraFERMA. Input files provided for TerraFERMA. `benchmark`: a new subduction benchmark performed using both Sepran and TerraFERMA. Input files provided for TerraFERMA. `Figure_III_4_models`: the results used in Figure 4, Part III. Files include: `Table2_Syracuse2010_updated.pdf` and `Table2_Syracuse2010_updated.xlsx`: updated parameter values for the Syracuse et al., PEPI, 2010 global suite. `Table3_part_Syracuse2010_updated.pdf` and `Table3_part_Syracuse2010_updated.xlsx`: updated parameter values for the Syracuse et al., PEPI, 2010 global suite. `Figure_comp_D80_WW09_all.pdf`: a comparison between the Sepran models presented in `D80` and `D80new` and those in Wada & Wang, G-cubed, 2009. `Figure_comp_D80new_TF-Sepran_all.pdf`: comparison between the TerraFERMA and Sepran models presented in `D80new`. `Figure_III_6_all_D80.pdf`: complete set of model results for Figure 6, Part III. `Subduction_parameters.pdf` and `Subduction_parameters.json`: a description of the parameters used in the global suite. `PEPS_part_II_preprint.pdf`: preprint of part II. `PEPS_part_III_preprint.pdf`: preprint of part III. `vankeken_wilson_peps_2023_TF_lowres_minimal.zip`: contains a set of low resolution vtu files from TerraFERMA with the final potential temperature output from steady state and time dependent simulations. Intended for fast downloading (compared to `vankeken_wilson_peps_2023.zip`) and comparison. Running a simulation Input files are provided for the TerraFERMA (the Transparent Finite ELement Rapid Model Assembler) simulations in this repository (`TF` subdirectories). Running them requires a working installation of TerraFERMA. If one is not available then consider using the docker image provided for this paper at: https://github.com/users/cianwilson/packages/container/package/vankeken_wilson_peps_2023 This docker image contains a complete installation of TerraFERMA and its dependencies, PETSc, FEniCS and SPuD, within an Ubuntu 20.04LTS OS. For a full description of TerraFERMA please refer to the webpage: http://terraferma.github.io本仓库包含两套综述论文所用的全球俯冲带模型套件的计算结果，分别为Wilson与van Keken发表于2023年PEPS期刊的"An introductory review of the thermal structure of subduction zones: II—numerical approach and validation"（俯冲带热结构导论综述：第二部分——数值方法与验证），以及van Keken与Wilson发表于2023年PEPS期刊的"An introductory review of the thermal structure of subduction zones: III—Comparison between models and observations"（俯冲带热结构导论综述：第三部分——模型与观测对比）。 目录与文件 `vankeken_wilson_peps_2023.zip`的子目录包括： `D80`：采用Sepran工具复刻Syracuse等人2010年发表于PEPI期刊的"D80"全球俯冲带模型套件。 `D80new`：基于Syracuse等人2010年PEPI文献的全新全球模型套件，采用更低的下地幔位温与误差函数边界条件，通过Sepran与TerraFERMA（Transparent Finite ELement Rapid Model Assembler，透明有限元快速模型组装器）两种工具完成计算，附带TerraFERMA的输入文件。 `benchmark`：通过Sepran与TerraFERMA完成的全新俯冲带基准测试模型，附带TerraFERMA的输入文件。 `Figure_III_4_models`：第三部分图4所使用的模型计算结果。 包含的文件包括： `Table2_Syracuse2010_updated.pdf`与`Table2_Syracuse2010_updated.xlsx`：Syracuse等人2010年PEPI文献中全球模型套件的更新参数值。 `Table3_part_Syracuse2010_updated.pdf`与`Table3_part_Syracuse2010_updated.xlsx`：Syracuse等人2010年PEPI文献中全球模型套件的更新参数值。 `Figure_comp_D80_WW09_all.pdf`：对比`D80`与`D80new`中的Sepran模型与Wada和Wang2009年发表于《G-cubed》的模型结果。 `Figure_comp_D80new_TF-Sepran_all.pdf`：对比`D80new`中TerraFERMA与Sepran两种工具的模型计算结果。 `Figure_III_6_all_D80.pdf`：第三部分图6所需的全部模型结果集。 `Subduction_parameters.pdf`与`Subduction_parameters.json`：全球模型套件所使用参数的说明文档。 `PEPS_part_II_preprint.pdf`：第二部分论文的预印本。 `PEPS_part_III_preprint.pdf`：第三部分论文的预印本。 `vankeken_wilson_peps_2023_TF_lowres_minimal.zip`：包含TerraFERMA生成的一组低分辨率vtu文件，内含稳态与时间依赖模拟的最终位温输出结果，旨在相比`vankeken_wilson_peps_2023.zip`实现更快下载与结果对比。 模拟运行 本仓库的`TF`子目录中提供了TerraFERMA模拟所需的输入文件。运行这些模拟需要预先安装好TerraFERMA环境；若无法直接部署，可使用本文提供的Docker镜像，地址为：https://github.com/users/cianwilson/packages/container/package/vankeken_wilson_peps_2023。 该Docker镜像基于Ubuntu 20.04LTS操作系统，内置完整的TerraFERMA及其依赖项PETSc、FEniCS与SPuD。如需了解TerraFERMA的详细说明，请访问其官方网页：http://terraferma.github.io。