STORM tropical cyclone wind speed return periods as global GeoTIFFs

Global tropical cyclone wind speed return period maps. This dataset is derived with minimal processing from the following datasets created by Bloemendaal et al, which are released with a CC0 license: [1] Bloemendaal, Nadia; de Moel, H. (Hans); Muis, S; Haigh, I.D. (Ivan); Aerts, J.C.J.H. (Jeroen) (2023): STORM tropical cyclone wind speed return periods. Version 4. 4TU.ResearchData. Dataset. https://doi.org/10.4121/12705164.v4 [2] Bloemendaal, Nadia; de Moel, Hans; Dullaart, Job; Haarsma, R.J. (Reindert); Haigh, I.D. (Ivan) et. al. (2023): STORM climate change tropical cyclone wind speed return periods. Version 4. 4TU.ResearchData. Dataset. https://doi.org/10.4121/14510817.v4 Datasets containing tropical cyclone maximum wind speed (in m/s) return periods, generated using the STORM datasets (see https://www.nature.com/articles/s41597-020-0381-2) and STORM climate change datasets (see https://figshare.com/s/397aff8631a7da2843fc). Return periods were empirically calculated using Weibull's plotting formula. The STORM_FIXED_RETURN_PERIOD dataset contains maximum wind speeds for a fixed set of return periods at 10 km resolution in every basin and for every climate model used here (see below). The GeoTIFFs provided in the datasets linked above have been mosaicked into single files with global extent for each climate model/return period using the following code: https://github.com/nismod/open-gira/blob/88dc522dd267020b16927e1b51ba46c4df4da277/workflow/tropical-cyclone/STORM.smk Files are named on the pattern: STORM_FIXED_RETURN_PERIODS_{STORM_MODEL}_{STORM_RP}_YR_RP.tif STORM_MODEL is be one of constant, CMCC-CM2-VHR4, CNRM-CM6-1-HR, EC-Earth3P-HR or HadGEM3-GC31-HM. The "constant" files are for the present day, baseline climate scenario as explained in dataset [1]. The other files are for 2050, RCP8.5 under different models as explained in the paper linked from dataset [2]. STORM_RP is one of 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000 or 10000. Updates 2024-04-05: recreated GeoTIFFs to align precisely with source pixels, updated references to v4, uploaded GeoTIFFs within ZIP to meet Zenodo file limits.全球热带气旋风速重现期地图。 本数据集经极少处理后，源自Bloemendaal等人制作的如下数据集，这些数据集采用CC0协议发布： [1] Bloemendaal, Nadia; de Moel, H. (Hans); Muis, S; Haigh, I.D. (Ivan); Aerts, J.C.J.H. (Jeroen) (2023): STORM热带气旋风速重现期。版本4。4TU.ResearchData。数据集。https://doi.org/10.4121/12705164.v4 [2] Bloemendaal, Nadia; de Moel, Hans; Dullaart, Job; Haarsma, R.J. (Reindert); Haigh, I.D. (Ivan) 等人 (2023): STORM气候变化热带气旋风速重现期。版本4。4TU.ResearchData。数据集。https://doi.org/10.4121/14510817.v4 本数据集包含以米每秒（m/s）为单位的热带气旋最大风速重现期，系通过STORM数据集（详见https://www.nature.com/articles/s41597-020-0381-2）与STORM气候变化数据集（详见https://figshare.com/s/397aff8631a7da2843fc）生成。重现期采用威布尔绘图公式（Weibull's plotting formula）进行经验计算。STORM_FIXED_RETURN_PERIOD数据集包含各海盆、本研究所用各气候模式下，固定一组重现期对应的最大风速，空间分辨率为10千米（详见下文）。 上述链接数据集所提供的GeoTIFF文件，已通过如下代码拼接为针对每个气候模式/重现期的全球范围单文件： https://github.com/nismod/open-gira/blob/88dc522dd267020b16927e1b51ba46c4df4da277/workflow/tropical-cyclone/STORM.smk 文件命名格式为：STORM_FIXED_RETURN_PERIODS_{STORM_MODEL}_{STORM_RP}_YR_RP.tif STORM_MODEL 可取以下值之一：constant、CMCC-CM2-VHR4、CNRM-CM6-1-HR、EC-Earth3P-HR 或 HadGEM3-GC31-HM。其中"constant"文件对应当前时代的基准气候情景，详见数据集[1]中的说明。其余文件对应2050年不同气候模式下的RCP8.5情景，详见数据集[2]所关联论文中的说明。 STORM_RP 可取以下数值之一：10、20、30、40、50、60、70、80、90、100、200、300、400、500、600、700、800、900、1000、2000、3000、4000、5000、6000、7000、8000、9000 或 10000。 更新记录 2024年4月5日：重新生成GeoTIFF文件以与源像素精确对齐，更新参考文献至v4版本，将GeoTIFF文件打包为ZIP格式上传以符合Zenodo的文件大小限制。