Ugum LiDAR - August 23 2024

This orthomosaic of Talofofo, Guam was created from 261 images taken on August 23 2024, at 300 ft AGL, with a M350. The mission was planned using the DJI Pilot application and post-processed using DJI Terra.This project was made possible through funding by the following grant(s): This project was made possible through funding by the following grant(s): NASA Guam EPSCoR (80NSSC22M0052), NASA Guam Space Grant (80NSSC20M0039 / UH Subaward: MA1550), and PI-CASC (G19AC00087)."本数据集为关岛塔洛托福（Talofofo）地区的正射影像镶嵌图（orthomosaic），由2024年8月23日拍摄的261张影像制作而成，拍摄高度为离地300英尺（AGL，Above Ground Level），拍摄设备为M350。本次飞行任务通过DJI Pilot应用程序规划，影像后处理工作采用DJI Terra软件完成。本项目得以顺利开展，得益于以下资助项目：NASA关岛EPSCoR（项目编号80NSSC22M0052）、NASA关岛太空资助计划（项目编号80NSSC20M0039 / 夏威夷大学分包合同号：MA1550）以及PI-CASC（项目编号G19AC00087）。