UST Cleanup Fund Potential Sites

Below is an explanation of the data along with some features that are available on this map application (description is also provided in the "Getting Started" widget of the application). A variety of different colored circles appear throughout the map. They represent sites that are associated with the following programs: 1) Department of Toxic Substances Control (DTSC) sites: a) Historical Inactive - Identifies sites from an older database that are non-active sites where, through a Preliminary Endangerment Assessment (PEA) or other evaluation, DTSC has determined that a removal or remedial action or further extensive investigation is required. b) School Cleanup - Identifies proposed and existing school sites that are being evaluated by DTSC for possible hazardous materials contamination. School sites are further defined as “Cleanup”, where remedial actions are or have occurred. c) School Evaluation - Identifies proposed and existing school sites that are being evaluated by DTSC for possible hazardous materials contamination. School sites are further defined as “Evaluation”, where further investigation is needed. d) Corrective Action - Investigation or cleanup activities at Resource Conservation and Recovery Act (RCRA) or state-only hazardous waste facilities (that were required to obtain a permit or have received a hazardous waste facility permit from DTSC or U.S. EPA). e) State Response - Identifies confirmed release sites where DTSC is involved in remediation, either in a lead or oversight capacity. These confirmed release sites are generally high-priority and high potential risk. f) Evaluation - Identifies suspected, but unconfirmed, contaminated sites that need or have gone through a limited investigation and assessment process. g) Tiered Permit - A corrective action cleanup project on a hazardous waste facility that either was eligible to treat or permitted to treat waste under the Tiered Permitting system. 2) State Water Board or DTSC sites: a) Leaking Underground Storage Tank (LUST) Cleanup - Includes all Underground Storage Tank (UST) sites that have had an unauthorized release (i.e. leak or spill) of a hazardous substance, usually fuel hydrocarbons, and are being (or have been) cleaned up. These sites are regulated under the State Water Board's UST Cleanup Program and/or similar programs conducted by each of the nine Regional Water Boards or Local Oversight Programs. b) Cleanup Program - Includes all "non-federally owned" sites that are regulated under the State Water Board's Site Cleanup Program and/or similar programs conducted by each of the nine Regional Water Boards. Cleanup Program Sites are also commonly referred to as "Site Cleanup Program sites". c) Voluntary Cleanup - Identifies sites with either confirmed or unconfirmed releases, and the project proponents have requested that the State Water Board or DTSC oversee evaluation, investigation, and/or cleanup activities and have agreed to provide coverage for the lead agency’s costs. 3) Other a) Permitted Tanks - The "Permitted Tanks" data set includes Facilities that are associated with permitted underground storage tanks from the California Environmental Reporting System (CERS) database. The CERS data consists of current and recently closed permitted underground storage tank (UST) facilities information provided to CERS by Certified Unified Program Agencies (CUPAs). *Note: Underground Storage Tank Cleanup and Cleanup Program project records are pulled from the State Water Board's GeoTracker database. The Permitted Tanks information was obtained from California EPA’s California Environmental Reporting System (CERS) database. All other project records were obtained from DTSC's EnviroStor database. Program descriptions come from DTSC’s EnviroStor Glossary of Terms and the State Water Board’s GeoTracker Site/Facility Type Definitions. The information associated with these records was last updated in the application on 4/24/2023. Boundary layers in this map application include: a) CA Senate District Boundaries Outline (2011) b) CA Senate District Boundaries (2011) c) CA Senate District Boundaries Outline (2022) d) CA Senate District Boundaries (2022) e) CA Assembly District Boundaries Outline (2022) f) CA Assembly District Boundaries (2022) g) CalEnviroScreen 3.0 h) CalEnviroScreen 4.0 <!--How to use the map: 1) Click on the map layers icon to view all the map’s available layers. Check or uncheck the checkbox next to each layer to display or hide it. <!--2) Click on the legend icon to view what the elements in each layer represents. Note: a layer must be turned on in order for it to be displayed on the legend. <!--3) Click on the district filters icon if you are interested in filtering for sites within a specified district. In this feature, select the type of district and then enter the district number within the “Type in a Value” box. Once ready, click the “Apply” button. <!--4) Click on the select icon (found on the top left corner of the map) to select multiple sites within a boundary that you set. Note: if you would like to view one site record, you can click on the site’s icon on the map. <!--5) Click the arrow icon (located at the bottom of the map) to view the attribute table of the sites and district boundary layers. Note: this feature will automatically update based on what is displayed on the map or selected.