Historical (linear) monuments generating AC1 easements, in Eure-et-loir (28)

The generator of a public easement is a geographical entity whose nature or function induced, by virtue of regulations, constraints on the way the land is occupied on the surrounding land.
The disappearance or destruction on the site of the generator does not result in the removal of the easement(s) associated with it. Only a new act of annulment or repeal by the competent authority may legally remove the effects of the easement(s) in question.

Grade AC1 easements relate to easements for the protection of listed or registered historic monuments: — Classification under historical monuments: these easements relate to buildings or parts of immovables whose conservation is of a public interest from the point of view of history or art. Owners of classified buildings may not carry out restoration, repair or alteration work without the prior authorisation of the regional prefect or the Minister responsible for culture. — Inscription as historical monuments: these easements relate to immovables or parts of immovables which, without justifying an application for immediate classification, are of sufficient historical or artistic interest to make their preservation desirable. Owners of registered immovables may not make any changes without prior declaration; No planning authorisation may be issued without the prior consent of the prefect of the region. — Buildings backed by classified buildings and buildings located in the field of visibility of classified or registered buildings: 1. Any building in contact with a classified building, in elevation, on the ground or in the basement shall be considered as a backed building. Any part not protected under the historical monuments of a partially classified building shall be considered as a backed building. 2. Any other building, naked or built, visible from the first or visible at the same time as it is situated within a perimeter determined by a distance of 500 m from the monument shall be considered to be within the field of visibility of a classified or registered building. This 500 m perimeter can be modified or adapted: • the appropriate protection perimeter (PPA): where an unprotected building is subject to a registration, classification or classification procedure, the architect of the buildings of France (ABF) may propose a protection area adapted to the nature of the building and its environment. • Modified perimeter of protection (PPM): the perimeter established around a historic monument can be modified on the proposal of the ABB. This resource describes the surface generators of Grade AC1 easements, i.e. right-of-way of monuments or parts of monuments classified or registered or classified and registered