Project STORM: monitoring the masonry of Hall I, at the Baths of Diocletian, with a prototype based on Arduino UNO. Dataset 2017 - 2019

This dataset for monitoring the masonry of Aula I at the Baths of Diocletian (Rome) was created by the University of Tuscia.<br> The measurements are carried out with a prototype based on Arduino UNO, have been investigated: Temperature and Relative Humidity of the internal environment and Temperature and Relative Humidity of contact on the masonry (with two sensors DHT22 AM2302); Acceleration along the three spatial axes (X, Y and Z), Pitch Index and Roll Index (with Gy 521 sensor); Surface pressure for the movement of a lesion (with FlexiForxe sensor). The data produced by the sensors were acquired and sent to the computer which automatically saved them every 10 seconds. The dataset is composed of the data obtained from 2017 to 2019 and separated by month in 11 sheets. In total about 40 million values were recorded, used to understand the slow hazard phenomena present on the monitored masonry. STORM (Safeguarding Cultural Heritage through Technical and Organisational Resources Management) is a HORIZON 2020 funded European Union Cultural Heritage project that aims at the protection of Cultural Heritage through a combination of technical and organizational resources (http://www.storm-project.eu).本数据集由图斯卡尼亚大学（University of Tuscia）创建，用于监测罗马戴克里先浴场（Baths of Diocletian）内Aula I的砖石结构健康状况。 本次测量采用基于阿尔杜伊诺UNO（Arduino UNO）的原型设备完成，监测内容包括： 1. 内部环境温湿度与砖石接触面温湿度（采用两枚DHT22 AM2302传感器）； 2. 沿空间三轴（X、Y、Z）的加速度、俯仰指数与横滚指数（采用Gy 521传感器）； 3. 病变位移所需的表面压力（采用FlexiForxe传感器）。 传感器采集的数据经采集并传输至计算机后，每10秒自动完成存储。本数据集涵盖2017年至2019年的采集数据，按月份划分为11个工作表，总计约4000万条数值，用于分析被监测砖石结构上存在的缓慢灾害性现象。 STORM（Safeguarding Cultural Heritage through Technical and Organisational Resources Management，即依托技术与组织资源管理保护文化遗产）是欧盟地平线2020（HORIZON 2020）资助的文化遗产保护项目，旨在通过技术与组织资源的结合实现文化遗产保护，项目官网：http://www.storm-project.eu。