Oyster Gape with Temperature Test Measurements at Gulf Coast Research Laboratory, 2018-07-01 to 2018-08-02

This dataset contains temperature observations and gape measurements obtained from six oysters using a newly-developed sensor and data transmission system. Testing was performed at the University of South Mississippi's Gulf Coast Research Laboratory (GCRL) in Ocean Springs, MS, from 2018-07-01 through 2018-08-02. The system consists of a Hall Effect sensor and a small magnet affixed to the shells of the oyster; the sensor produces a voltage proportional to the distance to the magnet and thus the gape length. This dataset supports the publication: Ali, A., Ali, K., Ukpebor, A., Hasan, M., Addy, J., Ikome, O., & Abu-El Humos, A. (2019). Hardware and Software Components of an Oysters’ Gape Measurement System. American Journal of Engineering and Applied Sciences, 12(3), 319–328. doi:10.3844/ajeassp.2019.319.328

本数据集包含通过新型传感器与数据传输系统，从6只牡蛎身上采集得到的温度观测数据与壳隙测量数据。测试于2018年7月1日至2018年8月2日期间，在位于密西西比州海洋斯普林斯的南密西西比大学墨西哥湾沿岸研究实验室（Gulf Coast Research Laboratory, GCRL）开展。该系统由霍尔效应传感器（Hall Effect sensor）与固定在牡蛎壳体上的小型磁体构成；传感器可输出与磁体间距（即壳隙长度）成正比的电压信号。本数据集支撑以下学术发表成果：Ali, A.、Ali, K.、Ukpebor, A.、Hasan, M.、Addy, J.、Ikome, O. 与 Abu-El Humos, A.（2019）发表于《美国工程与应用科学期刊》（American Journal of Engineering and Applied Sciences）第12卷第3期第319–328页的研究论文《牡蛎壳隙测量系统的硬件与软件组件》，DOI: 10.3844/ajeassp.2019.319.328。