Fabrication of powder filler for brazing and evaluation of its brazing performance using planetary ball milling method

Some data about the article "Fabrication of powder filler for brazing and evaluation of its brazing performance using planetary ball milling method"
The particle size of powder filler metal was analyzed by Malvern MS3000 laser diffraction particle size analyzer, and the measurement range was 0.01 μm ~ 3500 μm. The oxygen content of powder filler metal was measured by NOH-836 oxygen nitrogen hydrogen analyzer. The melting characteristics of the filler metal powder were analyzed with a differential scanning calorimeter of NitZ-DSC214, and the temperature rise rate was 10 ℃/min. The morphology of powder filler metal was observed and analyzed by Merlin Compact 62-19 scanning electron microscope (SEM). The IICMST-100 universal electronic testing machine was used to test the shear strength level of the brazed joint at a shear rate of 0.1 mm/min.

本数据集对应论文《采用行星式球磨法制备钎焊用粉末钎料并评估其钎焊性能》的相关实验数据。采用马尔文MS3000激光衍射粒度分析仪对粉末钎料的粒径进行分析，其测量范围为0.01 μm ~ 3500 μm；采用NOH-836型氧氮氢分析仪测定粉末钎料的氧含量；采用NitZ-DSC214型差示扫描量热仪分析粉末钎料的熔融特性，升温速率为10 ℃/min；采用Merlin Compact 62-19型扫描电子显微镜（Scanning Electron Microscope，SEM）观察并分析粉末钎料的微观形貌；采用IICMST-100型万能电子试验机，以0.1 mm/min的剪切速率测试钎焊接头的剪切强度。