Laser altimeter data obtained over sea-ice during the CASIMBO campaign in Apr, 2016; profile CAS2016_SBLA_20160410T1823_72.11_-137.31_thr06_data_Vers5@en

Sea ice surface roughness data were obtained during the CASIMBO campaign in Apr, 2016 with a Single Beam Laser Altimeter (SBLA) mounted inside an electromagnetic system (EM-Bird) towed at 10-30 m height above surface by an Airplane (Basler BT-67). A method developed by Hibler (1972) was used to a) isolate the surface profile from low-frequency variations associated with the aircraft motion and b) to identify pressure ridge sails. The processing steps are described in https://epic.awi.de/id/eprint/56364/. We applied a ridge detection threshold of 0.6 m, which means that only sails higher 0.6 m are detected. Version and name of the processing routine: Laser_Altimeter_Processing_VS5_06_20.py (vers.5, Feb 22, 2024, https://gitlab.awi.de/sitem/sbla_processing.git). SBLA records (RIEGL - LD90) are provided at a sampling rate of 100 Hz. Sensor accuracy is 5 cm with a beam diameter at surface of 5.8 cm. This specific dataset was obtained on 20160410T1823. It includes recorded altimeter readings, the derived surface elevation and width/height/spacing of detected pressure ridge sails. Note on data quality: 5.8 cm . File name: [DMS/PANGAEA Campaing Identifier] + [DEVICE] + [DATE/TIME] + [LAT/LON] + [Detection Threshold] + [Object] + [Version] + [Format]本数据集的海冰表面粗糙度数据采集于2016年4月的CASIMBO科考航次，由搭载于电磁系统（electromagnetic system，EM-Bird）内的单波束激光高度计（Single Beam Laser Altimeter，SBLA）完成采集。该电磁系统由巴特勒BT-67型飞机（Basler BT-67）拖曳，飞行高度为海面上方10至30米。本次数据处理采用Hibler于1972年提出的方法，可实现两项核心功能：a）从与飞机运动相关的低频噪声中分离出海面剖面信号；b）识别冰脊帆（pressure ridge sails）结构。数据处理流程详见https://epic.awi.de/id/eprint/56364/。本次研究设置的冰脊检测阈值为0.6米，即仅能识别高度高于0.6米的冰脊帆结构。数据处理程序的版本与名称：Laser_Altimeter_Processing_VS5_06_20.py（版本5，2024年2月22日，代码仓库地址：https://gitlab.awi.de/sitem/sbla_processing.git）。本次使用的单波束激光高度计型号为RIEGL LD90，采样率为100赫兹；传感器测量精度为5厘米，激光波束在海面的光斑直径为5.8厘米。本数据集的采集时间为20160410T1823，对应2016年4月10日18时23分。数据集包含原始高度计读数、反演得到的海面高程数据，以及已识别冰脊帆结构的宽度、高度与间距信息。数据质量说明：5.8厘米。文件名命名规则：[DMS/PANGAEA科考航次标识] + [设备名称] + [采集日期/时间] + [经纬度] + [检测阈值] + [目标对象] + [处理程序版本] + [文件格式]