Supplementary Data: A Global Fit Of The Mssm With Gambit (Arxiv:1705.07917)

<strong>Supplementary Data</strong> <em>A global fit of the MSSM with GAMBIT </em><br> <em>arXiv:1705.07917 </em> The files in this record contain data for the MSSM7 model considered in the GAMBIT “Round 1” weak-scale SUSY paper. The files consist of A number of YAML files corresponding to different sets of sampling parameters and/or priors MSSM7.yaml, a YAML file used for postprocessing StandardModel_SLHA2_scan.yaml, a universal YAML fragment included from other YAML files StandardModel_SLHA2_postprocessing.yaml, a YAML fragment included from MSSM7.yaml A final hdf5 file, containing the combined results of all sampling runs An example pip file, for producing plots from the hdf5 file using pippi gambit_preamble.py, a collection of python functions used for in-line data processing in the pip file The different YAML files corresponding to different samplers and/or priors follow the naming scheme MSSM7_[scanner]_[prior]_[slice]_[special].yaml , where scanner = Diver, MN prior = log, flat slice = nM2, pM2, Afunnel, hZfunnel, sqcoann, slcoann (positive or negative M2, A/H funnel, h/Z funnel, squark co-annihilation, slepton co-annihilation) special = jDE, [blank] (used pure jDE, or used the default lambdajDE) A few caveats to keep in mind: The final hdf5 results file included here was generated in the following way: carry out initial runs using YAML files following the naming scheme above combine the resulting hdf5 output files into a single file, using<br> gambit/Printers/scripts/combine_hdf5.py postprocess the samples to remove all points more than 5 sigma from the current best fit, using MSSM7_strip.yaml postprocess the samples to include a new likelihood term for LHC Run II searches, and to recompute the FlavBit likelihoods (these were buggy in a pre-release version of GAMBIT), using MSSM7.yaml . It is not necessary to repeat the steps listed in point 1 when running new scans; the LHC Run II likelihoods can be included in the original YAML file, so that no postprocessing step is required. The YAML files that we give here are updated compared to the ones that we used when generating the hdf5 file, in order to match the set of available options in the release version of GAMBIT 1.0.0. The included physics and numerics are however identical. The YAML files are designed to work with the tagged release of GAMBIT 1.0.0, and the pip file is tested with pippi 2.0, commit 2ab061a8. They may or may not work with later versions of either software (but you can of course always obtain the version that they do work with via the git history). The pip file is an example only. Users wishing to reproduce the more advanced plots in any of the GAMBIT papers should contact us for tips or scripts, or experiment for themselves. Many of these scripts are in multiple parts and require undocumented manual interventions and steps in order to implement various plot-specific customisations, so please don’t expect the same level of polish as for files provided here or in the GAMBIT repo.### 补充数据集 #### 基于GAMBIT的MSSM整体拟合 arXiv:1705.07917 本存档文件包含GAMBIT「第一轮」弱尺度超对称（Supersymmetry, SUSY）论文中所研究的MSSM7模型相关数据。 本数据集包含以下文件： 1. 若干对应不同采样参数集与/或先验分布的YAML文件 2. MSSM7.yaml：用于后处理的YAML配置文件 3. StandardModel_SLHA2_scan.yaml：供其他YAML文件引用的通用YAML片段文件 4. StandardModel_SLHA2_postprocessing.yaml：从MSSM7.yaml中引用的YAML片段文件 5. 最终hdf5文件：整合所有采样运行结果的文件 6. 示例pip文件：用于借助pippi工具从hdf5文件生成可视化图表 7. gambit_preamble.py：供pip文件内联数据处理使用的Python函数集 针对不同采样器与/或先验分布的YAML文件遵循如下命名规则：`MSSM7_[scanner]_[prior]_[slice]_[special].yaml`，其中： - scanner（采样器）：可选取值为Diver、MN - prior（先验分布）：可选取值为log（对数先验）、flat（均匀先验） - slice（物理类别切片）：可选取值为nM2、pM2、Afunnel、hZfunnel、sqcoann、slcoann，分别对应M2取负值、M2取正值、A/H漏斗区域、h/Z漏斗区域、夸克共湮灭、轻子共湮灭场景 - special（特殊标记）：可选取值为jDE或留空，分别代表使用纯jDE采样器，或使用默认的lambdajDE采样器 需留意以下注意事项： 1. 本次提供的最终hdf5结果文件生成流程如下： - 按照上述命名规则使用YAML文件执行初始采样运行 - 借助`gambit/Printers/scripts/combine_hdf5.py`工具，将生成的多份hdf5输出文件合并为单个文件 - 使用MSSM7_strip.yaml对采样结果进行后处理，剔除所有与当前最优拟合点偏差超过5σ的样本点 - 使用MSSM7.yaml对采样结果再次进行后处理：新增针对LHC Run II搜寻实验的似然项，并重新计算FlavBit似然（GAMBIT预发布版本中该部分存在缺陷） 2. 执行新的采样运行时，无需重复步骤1中的流程：可将LHC Run II似然项直接写入原始YAML文件，从而省略后处理步骤。 3. 本次提供的YAML文件相较于生成hdf5文件时使用的版本已完成更新，以匹配GAMBIT 1.0.0正式版中的可用选项集，但其中包含的物理模型与数值计算逻辑保持一致。 4. 本YAML文件专为GAMBIT 1.0.0正式版设计，pip文件已在pippi 2.0（commit 2ab061a8）环境中完成测试。二者未必兼容后续版本的对应软件（但用户可通过Git历史记录获取兼容的软件版本）。 5. 本pip文件仅为示例。若用户希望复现GAMBIT相关论文中的高级可视化图表，可联系我们获取制作技巧或脚本，或自行尝试。此类脚本通常包含多个模块，且需进行未文档化的手动操作与步骤，以实现图表的个性化定制，因此请勿期待其达到本数据集文件或GAMBIT代码仓库中文件的完善程度。