DistoX2 Calibration Cube Test

<strong>Problem description</strong> A DistoX calibration device has been developed, encouraging me to test DistoX calibration with and without it. A report on the findings is available on arXiv:2102.09891. An earlier report is published in Glas podzemlja 2020 (in Slovene, also available here). <strong>File description</strong> The data is organised in this way: The folder "Raw" contains files exported from TopoDroid; The folder "Converted" contains manually converted data from the folder "Raw" in a file format more suitable for further processing. The column "Name" that names the instrument and the target locations is added manually. In the cases where TopoDroid joined similar measurements into a survey shot due to unsuitable settings and did not export them, they are read from the phone screen and entered manually. The folder "Organised" contains all the data that gets automatically processed by the program DistoX.R. It is the data from the folder "Converted" with possible manual corrections (measurement order in case of mistakes, measurement length in case of the beam bouncing from an obstacle before the target, etc.), the file data_list.txt containing the list of the files to be processed with short descriptions (emphasising the manual corrections), and the file manual.txt containing Suunto measurements for comparison. The folder "Rest" contains notes that are neither automatically processed nor exported from TopoDroid but may be of interest. DistoX.R is the data processing program. Program DistoX.py draws a graph. The file is available at 10.5281/zenodo.4121748.**问题描述**：已研发一款DistoX校准设备，借此开展有无该设备时的DistoX校准测试。相关测试结果的报告已发布于arXiv:2102.09891。另有一份早期报告发表于《Glas podzemlja》2020年刊（原文为斯洛文尼亚语，亦可在此获取）。 **文件说明**：本数据集的文件组织形式如下： - "Raw"（原始数据）文件夹：存储从TopoDroid导出的文件。 - "Converted"（转换后数据）文件夹：包含对"Raw"文件夹内的数据进行手动格式转换后的文件，格式更适配后续处理流程。手动添加了"Name"列，用于标注仪器与目标测点信息。 若因参数设置不当，TopoDroid将相似测量数据合并为单条测线段（survey shot）且未导出对应文件时，相关数据将从手机屏幕手动录入。 - "Organised"（整理后数据）文件夹：存储由DistoX.R程序自动处理的全部数据。该数据源自"Converted"文件夹，并辅以必要的手动修正（如测量顺序出错时的调整、波束在抵达目标前被障碍物反射时的测量长度修正等）；其中"data_list.txt"文件记录了待处理文件清单及简要说明（重点标注手动修正内容）；"manual.txt"文件则收录了用于对比的松拓（Suunto）仪器测量数据。 - "Rest"（其他资料）文件夹：存储既未经过自动处理，也未从TopoDroid导出的备注信息，但具备参考价值。 DistoX.R为数据处理程序，DistoX.py用于绘制图表。相关程序文件可通过10.5281/zenodo.4121748获取。