Parameters of test materials.

In order to investigate the seepage law and crack development characteristics of dump slopes, as well as the impact on slope stability during drying and wetting cycles, a simulation test slope system was constructed in a rainfall environment, specifically designed to mimic the engineering conditions of dump slope. The apparent resistivity response formula for the seepage and crack development processes was derived based on the three-phase medium theory of rock-soil bodies and Maxwell’s conductivity formula. The geoelectric field characteristics pertaining to slope damage and the corresponding patterns of alteration were comprehensively investigated. The results demonstrate a negative correlation between resistivity and slope water content, with resistivity increasing as cracks develop and decreasing with water infiltration. The progression of crack formation in a rainfall environment on a dump slope can be categorized into three stages: The initial phase involves the saturation of the slope as water content increases. Subsequently, the second phase entails the initiation and expansion of capillary zones, along with the formation of dominant waterways. Lastly, the third phase encompasses the formation and expansion of cracks within the dumping site. The occurrence of sudden changes and abnormal fluctuations in apparent resistivity within a saturated slope signifies the presence of cracks and weak surfaces, leading to gradual and irreversible damage. This phenomenon serves as an indicator of slope damage and can be utilized for the early prediction of slope instability.