Measurement Data for CT of Battery Pouch Cell with Defects

These are the raw radiography images used to calculate the CT volume of a battery pouch cell with defects. Measured on a diondo d2 CT (using XWT-190 CT, Varex 4343DX-I) at TU Dresden. Tube: 150 KV, 100 µA Geometry: FOD 160 mm, FDD 1000 mm Detector: 3000 x 3000 px², 3000 Frames, 5x Framebinning, 3000 ms per Frame Data: 16bit unsigned integer, little endian The sample was prepared by Johannes Münch. For further details see the following paper: https://doi.org/10.1002/ente.202300323本数据集为用于计算带缺陷软包电池电芯CT体积的原始放射成像图像。数据采集于德累斯顿工业大学（TU Dresden）的diondo d2 CT设备（搭载XWT-190 CT系统与Varex 4343DX-I探测器）。扫描参数如下：X射线管电压150 kV，管电流100 μA；几何布局参数：源物距（FOD）160 mm，源探距（FDD）1000 mm；探测器参数：分辨率3000×3000像素，共采集3000帧图像，采用5倍帧合并（Framebinning），单帧曝光时长3000 ms。数据格式为16位无符号整数，采用小端序（little endian）存储。该样本由Johannes Münch制备。更多详细信息可参阅以下论文：https://doi.org/10.1002/ente.202300323