EBSD data for HRDIC analysis in AZ31

EBSD data set obtained from the HRDCI analysis in an AZ31 mg alloy surface after deformation without removing the gold speckles. The map was obtained using a CamScan MX2000 equipped with an Oxford Instruments EBSD detector at 25 kV and using step size of 0.23 µm.

This EBSD data set was obtained in the same region where the HRDIC analysis was performed for our publication entitled " Why magnesium is not brittle: a quantitative study on the accommodation of deformation incompatibility". The HRDIC data set can be found in https://doi.org/10.5281/zenodo.345313 while the notebook to visualise data is allocated in https://doi.org/10.5281/zenodo.376503.

Accompanying the EBSD data set, images of the IPF representation in the three sample axis and the Schmid factor for basal slip when loading respect to the X axis (horizontal respect to the images)

EBSD for HRDIC in AZ31 IPF-legend.tif -->  Legend for the different IPF maps

EBSD for HRDIC in AZ31 IPF-X.tif -->  EBSD map represented respect to the X-axis (horizontal)

EBSD for HRDIC in AZ31 IPF-X.tif -->  EBSD map represented respect to the Y-axis     (vertical)

EBSD for HRDIC in AZ31 IPF-X.tif -->  EBSD map represented respect to the Z-axis (observation axis)

EBSD for HRDIC in AZ31 m-Basal-legend.tif  -->  Legend for the Schmid factor for Basal slip map

EBSD for HRDIC in AZ31 m-Basal.tif  -->  Schmid factor values for Basal slip

EBSD for HRDIC in AZ31.cpr  -->  Raw data, .cpr format

EBSD for HRDIC in AZ31.crc  -->  Raw data, .crc format

EBSD for HRDIC in AZ31.txt  -->  Raw data, .txt format