Weather data from Environmental Education Center at Lancer Park from 2021-06-05 to 2021-07-19
收藏资源简介：
General Metadata for Lancer Park Environmental Education Center Atmospheric Sampling Station Files Specific metadata for each deployment can be found as text files with the file format of: <pre><code>LP_weather_YYYY-MM-DD_metadata.txt</code></pre> Where YYYY-MM-DD is the date that the sampling period ended. Metadata File Created 2019-10-27 by KF File Modified Description These data are from a weather station installed at the Longwood University Environmental Education Center at Lancer Park (37.308189, -78.402768) as part of the Longwood Environmental Observatory. All data are CC-BY and should be cited using the DOI available at https://zenodo.org/communities/leo/ Station Specifics The specific at each site are: <pre><code>* Barometric Pressure (mmHg) - Campbell Scientific CS100 Barometric Pressure Sensor * Light Flux Density (kW/m^2) - Campbell Scientific Pyranometer CS300 * Light Total Flux (kJ/m^2) - Campbell Scientific Pyranometer CS300 * Rainfall (mm) - Texas Electronics TE525 Tipping Bucket * Temperature (dC) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Relative Humidity (%) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Wind Speed (m/s) - RM Young 05103 Wind Speed and Direction Sensor * Wind Direction (degrees from true N) - RM Young 05103 Wind Speed and Direction Sensor * Data Collection - Campbell Scientific CR200 Data Logger * The sensors are sampled every 15 minutes</code></pre> Measurement Parameters, units, and Variable Names <pre><code>* DATE - the date that the record was collected (YYYY-MM-DD) * TIMESTAMP - the date and time that the record was collected (YYYY-MM-DD HH:MM:SS) * RECORD.x - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Avg - The average battery voltage (Volts) * BattV - The battery voltage at the time of the sampling (Volts) * BP_mmHg_Avg - The average barometric pressure over the sampling interval (mmHg) * BP_mmHg_Std - The standard deviation of the average barometric pressure (mmHg) * BP_mmHg - The barometric pressure at the time of the sampling (mmHg) * Rain_mm_Tot - The total rainfall during the sampling interval (mm) * AirTC_Avg - The average air temperature during the sampling interval (dC) * AirTC_Std - The standard deviation of the average air temperature (dC) * AirTC - the air temperature at the time of the sampling (dC) * RH - the relative humidity at the time of the sampling (%) * RH_Min - the minimum relative humidity recorded (%) * RH_TMn - the time that the minimum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RH_Max - the maximum relative humidity recorded (%) * RH_TMx - the time that the maximum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RECORD.y - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Min - the minimum battery voltage (Volts) * SlrkW_Avg - the average light flux density during the sampling interval (kW/m^2) * SlrkW_Std - the standard deviation of the average light flux density (kW/m^2) * SlrkW - the light flux density at the time of the sampling (kW/m^2) * SlrMJ_Tot - the total light flux (MJ/m^2) * WS_ms_Avg - the average wind speed during the sampling interval (m/s) * WS_ms_Std - the standard deviation of the average wind speed (m/s) * WS_ms - the wind speed at the time of the sampling event (m/s) * WindDir - the wind direction at the time of the sampling event (degrees from true N) * WS_ms_S_WVT - the average wind speed over the previous 15 minutes (m/s) * WindDir_D1_WVT - the average wind direction over the previous 15 minutes (degrees from true N) * WindDir_SD1_WVT - the standard deviation of the average wind direction over the previous 15 minutes (degrees from true N)</code></pre>
兰瑟公园环境教育中心大气采样站文件通用元数据 各次部署的专属元数据可在格式为`LP_weather_YYYY-MM-DD_metadata.txt`的文本文件中获取，其中`YYYY-MM-DD`代表采样周期的结束日期。 元数据文件由KF于2019-10-27创建；文件修改说明： 本数据集的数据源自安装于兰瑟公园朗伍德大学环境教育中心（坐标：37.308189, -78.402768）的气象站，该站点隶属于朗伍德环境观测站（Longwood Environmental Observatory）。所有数据采用CC-BY开源许可，引用时需使用Zenodo LEO社区（https://zenodo.org/communities/leo/）提供的DOI。 站点参数详情 各站点的观测配置如下： * 气压（mmHg）：坎贝尔科学（Campbell Scientific）CS100气压传感器 * 光通量密度（kW/m²）：坎贝尔科学（Campbell Scientific）CS300总辐射表 * 总光通量（kJ/m²）：坎贝尔科学（Campbell Scientific）CS300总辐射表 * 降雨量（mm）：德克萨斯电子（Texas Electronics）TE525翻斗式雨量计 * 气温（℃）：坎贝尔科学（Campbell Scientific）CS215温湿度传感器 * 相对湿度（%）：坎贝尔科学（Campbell Scientific）CS215温湿度传感器 * 风速（m/s）：RM Young 05103风速风向传感器 * 风向（相对于真北的角度）：RM Young 05103风速风向传感器 * 数据采集：坎贝尔科学（Campbell Scientific）CR200数据采集器 * 传感器采样间隔为15分钟 测量参数、单位及变量名 * DATE：记录采集日期，格式为YYYY-MM-DD * TIMESTAMP：记录采集的日期与时间，格式为YYYY-MM-DD HH:MM:SS * RECORD.x：原始下载数据中表格1的唯一标识编号，由数据采集器分配 * BattV_Avg：采样时段内的平均电池电压（伏特） * BattV：采样时刻的电池电压（伏特） * BP_mmHg_Avg：采样时段内的平均气压（mmHg） * BP_mmHg_Std：平均气压的标准差（mmHg） * BP_mmHg：采样时刻的气压（mmHg） * Rain_mm_Tot：采样时段内的总降雨量（mm） * AirTC_Avg：采样时段内的平均气温（℃） * AirTC_Std：平均气温的标准差（℃） * AirTC：采样时刻的气温（℃） * RH：采样时刻的相对湿度（%） * RH_Min：记录到的最小相对湿度（%） * RH_TMn：最小相对湿度测量发生的时间，格式为YYYY-MM-DD HH:MM:SS * RH_Max：记录到的最大相对湿度（%） * RH_TMx：最大相对湿度测量发生的时间，格式为YYYY-MM-DD HH:MM:SS * RECORD.y：原始下载数据中表格1的唯一标识编号，由数据采集器分配 * BattV_Min：最小电池电压（伏特） * SlrkW_Avg：采样时段内的平均光通量密度（kW/m²） * SlrkW_Std：平均光通量密度的标准差（kW/m²） * SlrkW：采样时刻的光通量密度（kW/m²） * SlrMJ_Tot：总光通量（MJ/m²） * WS_ms_Avg：采样时段内的平均风速（m/s） * WS_ms_Std：平均风速的标准差（m/s） * WS_ms：采样时刻的风速（m/s） * WindDir：采样时刻的风向（相对于真北的角度） * WS_ms_S_WVT：过去15分钟内的平均风速（m/s） * WindDir_D1_WVT：过去15分钟内的平均风向（相对于真北的角度） * WindDir_SD1_WVT：过去15分钟内平均风向的标准差（相对于真北的角度）
