CER - Small-scale Installations - Small Generation Unit - Wind (POA) 2010

This dataset presents the footprint of the number of installations of small generation unit (SGU) wind systems and their rated output in kilowatts (kW). The data spans the months of 2010 and includes the total for the year. The data is aggregated to Postal Areas (POAs) from the 2016 Australian Statistical Geography Standard (ASGS).\n\nEvery month the Clean Energy Regulator (CER) publishes small-scale renewable energy installation data files. These data files provide a list of SGU (small-scale solar panel, wind and hydro systems) and kW capacity by installed postcode, and solar water heaters (SWH) and air source heat pumps by installed postcode. The data represents all systems that have had certificates validly created against them. The data includes new installations, upgrades to existing systems and stand-alone (off-grid) systems. This data is not publicly available via the Renewable Energy Certificate (REC) Registry and does not include systems that are pending registration or have been failed by the CER.\n\nFor further information about this dataset, visit the data source:[Clean Energy Regulator - Postcode Data for Small-scale Installations](http://www.cleanenergyregulator.gov.au/RET/Forms-and-resources/Postcode-data-for-small-scale-installations).\n\nPlease note:\n\n * AURIN has spatially enabled the original data by joining the data with the [2016 ASGS POAs](https://www.abs.gov.au/ausstats/abs@.nsf/Lookup/by%20Subject/1270.0.55.003~July%202016~Main%20Features~Postal%20Areas%20(POA)~8)\n\n * Monthly installation data is provided for months where an installation was registered.\n\n * The data is current as at 30-09-2018.\n\n * Renewable Energy Target (RET) legislation allows a 12 month creation period for registered persons to create their certificates.\n\n * Small-scale technology certificates are calculated based on the life of the system. This differs for solar hot water heaters and small generation units (solar panels, wind and hydro). Further information can be found at the[Renewable Energy Target FAQ](http://www.cleanenergyregulator.gov.au/RET/Forms-and-resources/Renewable-Energy-Target-FAQs).\n\n * Capacity data has been revised to account for past data entry errors which caused significant inconsistencies. These systems were installed between 2001 and 2003. As a result of this revision, the cumulative installed capacity from 2004 onwards has reduced by 5.517MW.\n

本数据集收录了小型发电单元（SGU）中风电系统的装机数量及其以千瓦（kW）为单位的额定出力情况。数据覆盖2010年全年各月份，并包含年度总计值。本数据依据2016年澳大利亚统计地理标准（ASGS）聚合至邮政区域（POAs）维度。

澳大利亚清洁能源监管局（CER）每月都会发布小型可再生能源装机数据文件。此类文件包含按安装邮编分类的SGU（小型太阳能光伏板、风电及水力发电系统）装机容量（以千瓦计）清单，以及按安装邮编分类的太阳能热水器（SWH）与空气源热泵相关数据。本数据涵盖所有已合法签发证书的系统，包含新增装机、既有系统升级项目以及离网独立系统。该数据无法通过可再生能源证书（REC）登记平台公开获取，且不包含待登记或已被清洁能源监管局驳回的系统。

如需了解本数据集的更多信息，请访问数据源：[清洁能源监管局——小型装机邮编数据](http://www.cleanenergyregulator.gov.au/RET/Forms-and-resources/Postcode-data-for-small-scale-installations)。

请注意：

* 澳大利亚城市与区域信息基础设施（AURIN）通过将原始数据与[2016年澳大利亚统计地理标准邮政区域（ASGS POAs）](https://www.abs.gov.au/ausstats/abs@.nsf/Lookup/by%20Subject/1270.0.55.003~July%202016~Main%20Features~Postal%20Areas%20(POA)~8)进行关联，为原始数据赋予了空间属性。

* 仅为有装机登记的月份提供月度装机数据。

* 本数据的截止更新时间为2018年9月30日。

* 根据可再生能源目标（RET）相关法规，登记主体可享有12个月的证书签发周期。

* 小型技术证书的核发依据系统使用寿命计算，该计算规则在太阳能热水器与小型发电单元（SGU）之间存在差异。更多详情可查阅[可再生能源目标常见问题解答](http://www.cleanenergyregulator.gov.au/RET/Forms-and-resources/Renewable-Energy-Target-FAQs)。

* 此前因数据录入错误导致了严重的统计不一致，现已对装机容量数据进行修正。涉及修正的系统均安装于2001至2003年间。经此次修正后，2004年起的累计装机容量减少了5.517兆瓦（MW）。