Wind power plants layouts according to arbitrary reference points, Thanet and West of Duddon Sands

If this dataset is helpful for your research, please be kind to cite not only the dataset itself, but also the papers further below, which originally enabled me to create this dataset. This dataset contains the layout of the Thanet and West of Duddon Sands (WDS) offshore wind power plants (OWPPs), which can be utilized in a variety of studies. The x and y coordinates, in kilometers, were written according to arbitrary reference points. The data in its entirety came from the literature. The positions of the Thanet wind turbine generators (WTGs) came from [1], whereas the ones regarding West of Duddon Sands came from [2]. From figures of the OWPPs' layouts, I used Graph Grabber 2.0.2* to extract the data points. Then, based on visual inspection of [1,2], I utilized 2D projection to align WTGs that should be aligned. Neither [1] nor [2] provided the positions of the substations (SS). Thus, I approximated them based on [3]. The resulting layouts can be immediately seen in the png attachment. Regarding the arbitrary reference points for the coordinates, although the values in the x and y axes differ from [2], note that the distances among the WTGs are the same from [2]. Furthermore, the values in [2] are in meters, so they were converted to kilometers. There were no axes in [1]. Instead, a distance measurement was given, which is enough to obtain the layout. As seen in the attachments, the coordinates can be obtained either via the h5 file or via the csv files, which can be easily read by Matlab, Julia and Python, among others. *Graph Grabber 2.0.2 | Downloads And Demos | Software | Quintessa Limited | Scientific and Mathematical Consultancy [1] Pearce, B., Fariñas-Franco, J. M., Wilson, C., Pitts, J., deBurgh, A., & Somerfield, P. J. (2014). Repeated mapping of reefs constructed by Sabellaria spinulosa Leuckart 1849 at an offshore wind farm site. Continental Shelf Research, 83, 3-13. https://doi.org/10.1016/j.csr.2014.02.003 [2] Kallehave, D., Byrne, B. W., LeBlanc Thilsted, C., & Mikkelsen, K. K. (2015). Optimization of monopiles for offshore wind turbines. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 373(2035), 20140100. https://doi.org/10.1098/rsta.2014.0100 [3] Pérez-Rúa, J. A., Stolpe, M., Das, K., & Cutululis, N. A. (2019). Global optimization of offshore wind farm collection systems. IEEE Transactions on Power Systems, 35(3), 2256-2267. https://doi.org/10.1109/TPWRS.2019.2957312

若本数据集对您的研究有所助益，请务必同时引用本数据集以及下文所列的学术论文——正是这些论文的成果支撑了本数据集的构建。本数据集包含塞尼特（Thanet）与达登滩西（West of Duddon Sands, WDS）海上风电场（offshore wind power plants, OWPPs）的布局信息，可应用于各类相关研究。数据采用x、y坐标表示，单位为千米，坐标原点为任意设定的参考点。全部数据均源自公开文献：塞尼特风力发电机组（wind turbine generators, WTGs）的位置信息取自文献[1]，达登滩西海上风电场的风力发电机组位置则来自文献[2]。笔者通过Graph Grabber 2.0.2从上述海上风电场布局图中提取数据点，随后结合文献[1,2]的可视化内容，利用二维投影对应当对齐的风力发电机组。文献[1]与[2]均未提供变电站（substations, SS）的位置信息，因此笔者依据文献[3]对其位置进行了近似估算。最终生成的风电场布局可直接通过png格式附件查看。关于坐标的任意参考点：尽管本数据集的x、y轴数值与文献[2]存在差异，但请注意，各风力发电机组间的相对距离与文献[2]完全一致。此外，文献[2]中的坐标单位为米，已全部转换为千米。文献[1]未提供坐标轴，仅给出了距离测量数据，该信息已足够用于重构风电场布局。如附件所示，您可通过h5文件或csv文件获取坐标数据，此类格式均可通过Matlab、Julia、Python等工具轻松读取。*Graph Grabber 2.0.2 | 下载与演示 | 软件 | Quintessa Limited | 科学与数学咨询服务
[1] Pearce, B., Fariñas-Franco, J. M., Wilson, C., Pitts, J., deBurgh, A., & Somerfield, P. J. (2014). 海上风电场场址中刺管栖帚虫（Sabellaria spinulosa Leuckart 1849）营造的礁体重复测绘. 《大陆架研究》（Continental Shelf Research）, 83, 3-13. https://doi.org/10.1016/j.csr.2014.02.003
[2] Kallehave, D., Byrne, B. W., LeBlanc Thilsted, C., & Mikkelsen, K. K. (2015). 海上风力发电机组单桩基础优化. 《英国皇家学会学报A辑：数学、物理与工程科学》（Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences）, 373(2035), 20140100. https://doi.org/10.1098/rsta.2014.0100
[3] Pérez-Rúa, J. A., Stolpe, M., Das, K., & Cutululis, N. A. (2019). 海上风电场集电系统全局优化. 《IEEE电力系统学报》（IEEE Transactions on Power Systems）, 35(3), 2256-2267. https://doi.org/10.1109/TPWRS.2019.2957312