Dataset of Paper "Optimization of thermal exfoliation of graphitic carbon nitride for methylparaben photocatalytic degradation under simulated solar radiation"

Dataset of Paper "Optimization of thermal exfoliation of graphitic carbon nitride for methylparaben photocatalytic degradation under simulated solar radiation" Experimental dataset of Thermogravimetric analysis of bulk-U in air as a function of (a) temperature and (b) time. The arrows included in (a) indicate the starting point of the analysis in (b). Dataset of (a) Correlation between predicted and experimental values for the photocatalytic degradation of MeP at different irradiation times. (b) Pareto diagram of standardized effects of the factorial design proposed for the response at 45 min of photocatalytic reaction (Y45). Dataset Representative response and contour surfaces of the effect of temperature and exfoliation time of bulk g-C3N4 on the photocatalytic performance for % MeP removal (scale from 0 to 100 %) at different solar irradiation times: (a) 30, (b) 45, and (c) 60 min. Dataset of (a−b) Representative response and contour surfaces of the relative costs associated with the degradation of 99.5% of MeP as a function of the effect of temperature and exfoliation time. (c−d) Breakdown of the percentages of costs associated with the material with the lowest relative cost (U450-2; inner circle) and higher costs (U400-2 and U450-6; outer circle for c and d, respectively) Dataset of (a) XRD patterns (b) enlarged view of (0 0 2) peak, (c) N2 adsorption−desorption isotherms and (d) FTIR spectra of bulk-U and exfoliated materials. Dataset of (a) UV-Vis DR spectra, (b) Tauc plot to calculate the band gap energy of the synthesised materials. Dataset of (a) PL spectra of bulk-U reference and exfoliated materials, (b) Profile analysis by gaussian fitting for bulk-U and (c) Timeresolved fluorescence decay spectra monitored at 430 nm under 350 nm excitation for bulk-U, U400-2 and U450-6.论文《模拟太阳光辐射下对羟基苯甲酸甲酯光催化降解用石墨相氮化碳热剥离工艺优化》的数据集 本数据集为块体U在空气中的热重分析（thermogravimetric analysis, TGA）实验数据，分别随(a)温度、(b)时间变化。图(a)中的箭头指示了图(b)中分析的起始点。 本数据集包含：(a) 不同辐照时长下对羟基苯甲酸甲酯（methylparaben, MeP）光催化降解的预测值与实验值的相关性；(b) 针对45分钟光催化反应响应值（Y₄₅）所提出的析因设计的标准化效应帕累托图。 本数据集为不同太阳辐照时长下，块体石墨相氮化碳（graphitic carbon nitride, g-C₃N₄）的热剥离温度与剥离时间对MeP去除率（范围0~100%）光催化性能影响的典型响应面与等高线图：(a) 30分钟、(b) 45分钟、(c) 60分钟。 本数据集包含：(a−b) 温度与剥离时间对99.5%MeP降解所需相对成本影响的典型响应面与等高线图；(c−d) 分别为相对成本最低的材料（U₄₅₀-2；内圈）与相对成本更高的材料（U₄₀₀-2、U₄₅₀-6；分别对应c、d的外圈）的成本占比分解。 本数据集为块体U与剥离后材料的(a) X射线衍射（XRD）图谱、(b) (002)晶面衍射峰的放大图、(c) 氮气吸附-脱附等温线、(d) 傅里叶变换红外（FTIR）光谱。 本数据集为(a) 合成材料的紫外-可见漫反射（UV-Vis DR）光谱、(b) 用于计算合成材料带隙能的塔夫（Tauc）图。 本数据集包含：(a) 块体U参比样与剥离后材料的光致发光（PL）光谱、(b) 块体U的高斯拟合轮廓分析、(c) 在350nm激发下、430nm波长处监测的块体U、U₄₀₀-2及U₄₅₀-6的时间分辨荧光衰减谱。