Steel V-structure blast simulation results

This is the data from the thesis titled:Response of composite and steel V-structures to localised air blast loading (2023)This compressed folder contains the raw data extracted from the steel V-structure blast simulations. The files have first been separated based on the V-angle. In each of the subfolders, the V-tip radii and charge mass configurations were varied. Included in the files are the CSV files of the mid-point displacement time histories, ridge node z displacements and x coordinates, and crosscut node y and z coordinates. Also included are the fluid-structure interaction forces which can be used to extract the impulse transferred from the explosive loading to the target structure. All simulations were performed on LS-DYNA R8. The first zipped folder titled - Steel_V_structure_blast_results.zip contains three subfolders labelled:90105120- The subfolders inside each of these folders contain a series of csv files with the displacement and coordinate histories for the blast simulated steel V-structures. - Included are also csv files of the average fluid-structure interaction forces which can be used to obtain the impulse transferred from the explosive to the V-structures.

本数据集源自题为《复合材料与钢制V型结构对局部化空气爆轰荷载的响应》（2023年）的论文。该压缩文件夹包含从钢制V型结构爆轰仿真中提取的原始数据。文件首先根据V型角度进行分类。在每个子文件夹中，V型尖端半径和电荷质量配置均有所变化。文件中包含中点位移时间历史记录的CSV文件、脊节点z向位移和x坐标，以及横截面节点的y向和z坐标。此外，还包括流体-结构相互作用力，可用于提取从爆炸荷载传递到目标结构的冲量。所有仿真均在LS-DYNA R8上完成。名为“Steel_V_structure_blast_results.zip”的第一个压缩文件夹包含三个子文件夹，分别标记为：90105120。这些子文件夹内部包含一系列csv文件，记录了爆轰模拟的钢制V型结构的位移和坐标历史。同时，还包括平均流体-结构相互作用力的csv文件，可用于获取从爆炸荷载传递到V型结构的冲量。