Steady BEM Data using B-GO code for DanAero Turbine with 3D Hybrid CFD Polar

This dataset represents a steady state BEM (Blade Element Momentum) calculations for the DanAero 2.3 MW turbine [1] computed using B-GO code [2,3]. The calculations were carried out by adopting hybrid 3D CFD polar input according to [4] to ensure the best accuracy in off-design conditions. The calculations cover the following range of parameters: wind speed: [3,20] pitch angle: [-6,+6] rotational speed: [12.3, 15.8]. The data mainly reports the calculated rotor power and thrust for the aforementioned conditions. The calculated dataset is freely used and available to public. [1] H.A. Madsen, C. Bak, U. Paulsen, M. Gaunaa, P. Fuglsang, J. Romblad, N. Olesen, P. Enevoldsen, J. Laursen, L. Jensen. "The DAN-AERO MW experiments: final report." Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi, 2010. orbit. dtu. dk. Accessed 13 November 2017 [2] G. Bangga. “Comparison of blade element method and CFD simulations of a 10 MW wind turbine.” Fluids 3 (4), 73. 2018. https://doi.org/10.3390/fluids3040073 [3] G. Bangga and T. Lutz. “Aerodynamic modeling of wind turbine loads exposed to turbulent inflow and validation with experimental data.” Energy 223, 120076, 2021. https://doi.org/10.1016/j.energy.2021.120076 [4] G. Bangga. Wind Turbine Aerodynamics Modeling Using CFD Approaches. AIP Publishing LLC, Melville, New York, 2022. https://doi.org/10.1063/9780735424111