Figure Sets, Catalog Tables, and Other Technical Materials Related to "ALMA-IMF IX: Catalog and Physical Properties of 315 SiO Outflow Candidates in 15 Massive Protoclusters"

This Zenodo DOI contains additional data products and technical files for the publication "ALMA-IMF IX: Catalog and Physical Properties of 315 SiO Outflow Candidates in 15 Massive Protoclusters" (Towner et al. 2024). All files, metadata, and other components and materials in this Zenodo entry are licensed under Creative Commons license CC-BY-NC 4.0. This license allows for non-commercial use so long as proper attribution is given to the original creator. Commercial use of these materials is prohibited. Further details of this license can be found on the Creative Commons website at: https://creativecommons.org/licenses/by-nc/4.0/ This upload contains: 1. The Figure Set for Figure 1. The .png summary figures are contained in 5 zip files (Figset1_part1of5.zip, etc.). The file naming structure is <fieldname>_<candididatename>.summary.png, i.e. the summary figure for Candidate #1 in Field G008.67 is G008.67_s1.summary.png. 2. The Figure Set for Figure C1. All 15 .png files are contained in the file "FigsetD1_all.zip." Please note: due to post-acceptance edits at the proofing stage, there is no Appendix D in the ApJ article. All files with "D1" in the name refer to either Figure Set C1 or Table C1 in the ApJ publication, as appropriate. 3. ECSV versions of Table 3 and Table C1 (labeled as "D1" in this upload), and a LaTeX version of Table 3. 4. CRTF apertures and position-velocity paths for all candidates, and FITS files of the position-velocity diagrams for all candidates. The relevant file is "apertures_paths_pvdiagrams.zip." This file contains a directory structure. There are 15 subdirectories, each named for the field to which it corresponds. Within each subdirectory are the aperture and pvpath CRTF files, and the PV diagram FITS files. a. Apertures follow the naming convention s??_aperture.crtf, where "??" is the candidate number. Apertures are color-coded by outflow color (red outflows use red lines, blue outflows use blue, and bipolar outflows use purple/magenta). The aperture for G008.67 Candidate #1 is named s1_aperture.crtf, etc. b. Position-velocity paths follow the naming convention "s??_path<.direction>.crtf" where <.direction> is ".ra" or ".dec" or blank (""). Directions are necessary because CARTA saves point-like regions in the order in which they were last modified. In order to ensure the points are used in the correct order in pvextractor (or another program), users should first sort the points in the CRTF file in order of increasing ra (for files containing ".ra") or increasing dec (for files containing ".dec"). Files without a <.direction> in the name indicate that the candidate is classified as "complex or cluster" and so sorting is not particularly relevant. c. Position-velocity diagrams are uploaded as FITS files, and follow the naming convention "s??_pvslice.fits" where "??" is the candidate number. Note that some paths are extremely short and thus their PV diagrams can be difficult to read. Although all PV diagrams are shown as square in Towner et al. (2024), allowing the PV diagram to display with its natural aspect ratio may be more useful in some cases. Final note: The FITS cubes used in this analysis are not uploaded to Zenodo due to upload size limitations. The full cubes and continuum images for each field can be found on the ALMA-IMF Project website (https://www.almaimf.com/data.html). Cubes cut to +/- 95 km/s, noise cubes, and cubes in units of K instead of Jy/beam can be requested by emailing Dr. Allison Towner at apmtowner [at] gmail.com.本Zenodo DOI包含论文《ALMA-IMF IX：15个年轻大质量星团中315个SiO外流候选体的星表与物理性质》（Towner等人，2024）的补充数据产品与技术文档。 本Zenodo条目下的所有文件、元数据及其他组件与材料均采用知识共享署名-非商业性使用4.0国际许可协议（CC-BY-NC 4.0）授权。该许可允许非商业性使用，但需对原创作者予以适当署名；严禁对本材料进行商业使用。该许可的详细条款可查阅知识共享官方网站：https://creativecommons.org/licenses/by-nc/4.0/ 本上传内容包含： 1. 图1图集：5个压缩包（Figset1_part1of5.zip等）内含所有.png格式汇总图。文件命名规则为<场名>_<候选体标识名称>.summary.png，例如G008.67场中候选体#1的汇总图命名为G008.67_s1.summary.png。 2. 图C1图集：全部15个.png格式文件均打包于"FigsetD1_all.zip"中。请注意：由于校稿阶段的接收后编辑，ApJ论文中并未包含附录D。本上传文件中所有带有"D1"字样的文件，均对应ApJ出版物中的图C1或表C1，具体视情况而定。 3. 表3与表C1的ECSV格式版本（本上传中标记为"D1"），以及表3的LaTeX格式版本。 4. 所有候选体的CRTF孔径与位置-速度路径文件，以及所有候选体的位置-速度图FITS文件，相关打包文件为"apertures_paths_pvdiagrams.zip"。该文件包含目录结构：共15个子目录，每个子目录以其对应的场命名。每个子目录内包含孔径、pvpath CRTF文件，以及位置-速度图FITS文件。 a. 孔径文件命名遵循s??_aperture.crtf规则，其中"??"为候选体编号。孔径按外流颜色进行编码：红色外流使用红色线条，蓝色外流使用蓝色线条，双极外流使用紫色/洋红色线条。例如G008.67场候选体#1的孔径文件命名为s1_aperture.crtf。 b. 位置-速度路径文件命名遵循"s??_path<.direction>.crtf"规则，其中<.direction>为".ra"、".dec"或空字符串（""）。需注意方向标识的原因：CARTA会按最后修改顺序保存点状区域。为确保在pvextractor或其他程序中按正确顺序使用点，用户需先将CRTF文件中的点按赤经递增（针对带有".ra"后缀的文件）或赤纬递增（针对带有".dec"后缀的文件）顺序排序。文件名中无<.direction>标识的候选体，均被归类为"复杂或星团"类型，因此无需进行排序。 c. 位置-速度图以FITS格式上传，命名规则为"s??_pvslice.fits"，其中"??"为候选体编号。请注意：部分路径极短，对应的位置-速度图可能难以阅读。尽管Towner等人（2024）中将所有位置-速度图均显示为正方形，但在部分场景下，使用其自然宽高比进行展示可能更具实用性。 最后补充说明：由于上传尺寸限制，本分析中使用的FITS数据立方体并未上传至Zenodo。各场的完整数据立方体与连续谱图像可于ALMA-IMF项目官网（https://www.almaimf.com/data.html）获取。裁剪至±95 km/s范围的数据立方体、噪声数据立方体，以及以开尔文（K）而非Jy/beam为单位的数据立方体，可通过发送邮件至Allison Towner博士（邮箱地址：apmtowner [at] gmail.com）申请获取。