Air humidity data from QCAT Fleck testbed network

Air Humidity data collected using an SHT15 temperature/humidity sensor inside a stevenson screen mounted above the ground. The measurements were taken during testing in 2009. QCAT is a CSIRO facility in the suburb of Pullenvale in Brisbane, Australia.\nLineage: The data was obtained during testing of the Fleck(TM) platform. The sensor was a Sensirion SHT15 sensor connected digitally to the Fleck. The sensor was housed in a stevenson screen and mounted on a pole approximately 1.6 meters above the ground between two buildings. The humidity data is uncorrected in respect to temperature changes - information on correction can be sourced from Sensirion.

本数据集为2009年测试期间采集的空气湿度数据，采集设备为SHT15温湿度传感器，该传感器安装于地面上方的斯蒂芬森百叶箱（Stevenson Screen）内。QCAT是CSIRO设于澳大利亚布里斯班Pullenvale郊区的一处设施。
数据溯源：本数据集采集自Fleck™平台的测试工作。所用传感器为盛思锐（Sensirion）SHT15传感器，通过数字方式连接至Fleck平台。该传感器安置于斯蒂芬森百叶箱内，并安装于两栋建筑之间、距地面约1.6米的立杆之上。本次采集的湿度数据未针对温度变化进行校正——相关校正方案可从Sensirion公司获取。