ENDGAME - Laboratory Experiment 2024-01-17 Exp. 025 - High Speed Camera data

Shock-tube experiments in combination with high speed Schlieren shadow photography. The shocktube setup consists of a high-pressure reservoir connected with a cylindrical tube through a diaphragm pulse valve which allows a fast release of pressurized gas into the ambient pressure tube. The high-pressure reservoir is filled with compressed air at a given overpressure with respect to ambient pressure (up to 8 bar). The pipe was either empty (i.e. with air at ambient conditions) or filled with a given amount of small particles. We adopted pipes an inner diameter of 4 cm and different lengths (20, 30 and 80 cm). We also considered different volumes of pressurized gas (~650 cm3 and ~1550 cm3). A pressure sensor has been placed at the vent of the conduit to record pressure variations during experiments. Images from the high speed camera were collected at a frame rate of 30000 fps. When the valve is open, a jet flow is produced, with shock and acoustic waves propagating in the atmosphere, which become visible due to the high speed Schlieren shadow photography.本数据集基于激波管（Shock-tube）实验结合高速纹影阴影摄影（Schlieren shadow photography）技术完成。 激波管实验装置由高压储气罐与圆柱形实验管组成，二者通过膜片脉冲阀连接，该阀可将高压气体快速释放至常压实验管内。高压储气罐内填充的压缩空气相对于环境压力具有设定过压，最大过压可达8巴。实验管可保持为空（即内部为环境条件下的空气），或填充设定质量的细小颗粒。本次实验采用内径为4厘米、长度分别为20、30和80厘米的实验管，同时设置了两种不同容积的高压储气腔（约650立方厘米与约1550立方厘米）。实验过程中，在导管排气口处安装了压力传感器以记录实验期间的压力变化。高速相机以30000帧每秒的帧率采集实验图像。 当脉冲阀开启时，会产生射流，同时激波与声波在大气中传播，上述流动现象可通过高速纹影阴影摄影清晰观测到。