Relay Pole 1 deployment at Orpheus Island as part of the Facility for the Automated Intelligent Monitoring of Marine Systems - FAIMMS

A 6m steel self supporting pole was erected on the southern side of Pelorus Island in the channel between Pelorus Island and Orpheus Island. The pole provides network connectivity for the other Relay Poles located on the northen edge of Orpheus Island (RP2 and RP3) as well as a back-haul link to the mainland using a nextG connection.\n\nThe pole has an array of sensors on it including two MEA thermistors located 50m and 100m away from the pole on a transect from the pole into the deep water of the channel. The pole also has a SeaBird SBE39 (temp + pressure) located around 100m from teh pole and a SBE37 (conductivity, temperature and pressure) located approximatly 200m from teh pole in the deep waters of the channels. See the sensor metadata records (children of this record) for the exact locations and depths.

在佩洛鲁斯岛（Pelorus Island）与奥菲斯岛（Orpheus Island）之间航道的佩洛鲁斯岛南侧，架设了一根6米高的钢制自立式桅杆。该桅杆为位于奥菲斯岛北侧边缘的其余中继杆（Relay Poles，RP2与RP3）提供网络连接，并通过nextG连接搭建通往大陆的回传链路。

该桅杆搭载了一组传感器阵列，其中包含两台MEA热敏电阻（MEA thermistors），它们被布设在从桅杆向航道深水区延伸的断面上，分别距桅杆50米与100米。此外，该桅杆附近还布设了一台SeaBird SBE39（温度+压力传感器），位置距桅杆约100米；另有一台SBE37（电导率、温度与压力传感器），布设于航道深水区内，距桅杆约200米。如需获取精确的布设位置与水深数据，请参阅本记录的子项——传感器元数据记录。