Surat cumulative management area

## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.\n\n\n\nThe dataset reflects the spatial extent of the Surat Cumulative Management Area. The area was declared under the Water Act 2000 to aid in identifying and managing overlapping underground water impacts incurred from multiple petroleum tenures.\n\n## **Purpose** \n\nThe Surat Cumulative Management Area was declared under the Water Act 2000 to aid in the assessment and management of overlapping underground water impacts from multiple petroleum tenures, on which activities such as coal seam gas (CSG) operate.The declaration of the Surat CMA enables the assessment of future impacts using a regional modelling approach and the development of management responses, such as monitoring programs, that are relevant to the potential cumulative impacts.It will also enable responsibilities to be assigned, through the DERM approved underground water impact report (produced by the Queensland Water Commission (QWC)), to each petroleum tenure holder in the area for monitoring, bore and baseline assessments, and negotiating make good arrangements.\n\n## **Dataset History** \n\nSelected 'Blocks' as defined by the Petroleum and Gas Act 1923, were used to determine the Surat Cumulative Management Area. As the boundaries of blocks were based upon Parallels and Meridians derived from the Australian Geocentric Datum 1966, The AGD66 National Grid Transformation was used as the grid transformation using software, GDAy 2.1 (QLD Government, NRM) to convert to the Geocentric Datum of Australia 1994. Latitudes and Longitudes (decimal degrees) were then rounded to four decimal places.\n\n## **Dataset Citation** \n\nDepartment of Environment and Heritage Protection (2011) Surat cumulative management area. Bioregional Assessment Source Dataset. Viewed 11 April 2016, http://data.bioregionalassessments.gov.au/dataset/595d5055-d59d-43fa-975c-6de340f2e510.

**摘要**

本数据集及其元数据声明由第三方提交至生物区域评估计划（Bioregional Assessment Programme），此处按原始提交内容完整呈现。

本数据集涵盖苏拉特累积管理区（Surat Cumulative Management Area）的空间范围。该区域依据《2000年水法》（Water Act 2000）划定，用于识别并管控多份石油租约带来的叠加地下水影响。

**用途说明**

苏拉特累积管理区依据《2000年水法》（Water Act 2000）划定，旨在评估与管控多份石油租约（含煤层气（coal seam gas, CSG）等作业活动）引发的叠加地下水影响。

苏拉特累积管理区的设立，可支持采用区域建模方法开展未来影响评估，并制定针对潜在累积影响的管理应对方案（如监测计划）。同时，通过昆士兰州水资源委员会（Queensland Water Commission, QWC）编制、经环境与资源管理部（DERM）批准的地下水影响报告，可明确区域内各石油租约持有人在监测、钻孔与基线评估方面的责任，并协商补偿安排。

**数据集历史**

本数据集以1923年《石油与天然气法》（Petroleum and Gas Act 1923）定义的“区块（Blocks）”为基础划定苏拉特累积管理区。由于区块边界基于澳大利亚1966年地心坐标系（Australian Geocentric Datum 1966, AGD66）导出的纬线与经线，故借助GDAy 2.1软件（昆士兰州政府，自然资源与矿业部（NRM））的AGD66国家网格转换工具，将坐标转换为澳大利亚1994年地心坐标系（Geocentric Datum of Australia 1994, GDA94）。随后将经纬度（十进制度数）保留至四位小数。

**数据集引用**

环境与遗产保护部（Department of Environment and Heritage Protection）（2011）：《苏拉特累积管理区》，生物区域评估源数据集。2016年4月11日查阅，http://data.bioregionalassessments.gov.au/dataset/595d5055-d59d-43fa-975c-6de340f2e510。