Data of Graduation Project 'Anisotropic Swelling of a Cylindrical Hydrogel'

The data is generated as part of the graduation project 'Anisotropic Swelling of a Cylindrical Hydrogel'. The data is generated via Mathematica Notebooks that can be retrieved directly from the GitHub. These notebooks are annotated, and the data provided here can be reproduced by using the appropriate parameters. The Mathematica notebooks can be subdivided in two categories, namely 1) Notebooks that generate data and 2) Notebooks that analyze the data. Notebooks that are used to analyze the data must be adjusted to import the data correctly. ReadMe-files are added to guide you through the process when using these notebooks. The data that is stored here can be subdivided into three different sets: Data - spring models.zip. This data is related to the spring model as introduced in part I of the thesis. Data – Spherical Poroelasticity Model.zip. This data is related to the spherical poroelastic model as introduced in the appendix of the thesis. Data – Cylindrical Poroelasticity Model.zip. This data is related to the cylindrical poroelastic model as introduced in part II of the thesis. Each of these folders are subdivided into folders, which contain the following data: Data – spring models.zip. Read the ReadMe-Information-Data.txt for more information. Each folder contains the data that is generated by the notebook 'discrete3Dmodel-meanB-experimental3kDa.nb'. The numbers indicated the values for Ka, Kb and Kc before and after the transition respectively. Data is used to generate figure 3.3 of the report. Data – Spherical Poroelasticity Model.zip. Typical results for spherical hydrogel. Folder contains the data that is generated by the notebook Spherical-swelling-notebook.wl with the parameters as provided in the folder. Data is used to generate figure C.2, C.3 of the report Effect of grid size N - N = 5. Folder contains the data that is generated by the notebook Spherical-swelling-notebook.wl with the parameters as provided in the folder. Data is used to generate figure C.3 of the report Effect of chemical potential mu - mu = 0. Folder contains the data that is generated by the notebook Spherical-swelling-notebook.wl with the parameters as provided in the folder. Data is used to generate figure C.3 of the report Data – Cylindrical Poroelasticity Model.zip. Equilibrium Dynamics. Folder contains data generated by the notebook Cylinder-finalversion-annotated.wl with the parameters as provided in the folder. Data is used to generate figures 6.1 – 6.4 of the report Anisotropy parameters. Folder contains data for different anisotropy parameters generated by the notebook Cylinder-finalversion-annotated.wl with the parameters as provided in the folder. Data is used to generate figures 6.5 – 6.7 of the report Relative Humidity Rate. Folder contains data for different rates (i.e. different times) and different gridpoints generated by the notebook Cylinder-finalversion-annotated.wl with the parameters as provided in the folder. Data is used to generate figures 6.8 – 6.10 of the report Transition. Folder contains data for transitions with different properties generated by the notebook Cylinder-finalversion-annotated.wl with the parameters as provided in the folder. Data is used to generate figures 6.11 – 6.14, E.1 – E.8 of the report The other figures in the report are generated without explicit data storage, and can (in most cases) be generated directly with the appropriate notebook provided at GitHub. The correct version on GitHub used for generating the data can be found via https://github.com/QBraat/Cylindrical-Gel-Swelling/releases/tag/v1.0.

本数据集源自毕业设计项目《圆柱水凝胶的各向异性溶胀》（Anisotropic Swelling of a Cylindrical Hydrogel）。所有数据均通过Mathematica笔记本生成，相关笔记本可直接从GitHub平台获取。这些笔记本均带有注释，通过设置对应参数即可复现本数据集提供的全部数据。
Mathematica笔记本可分为两类：1）用于生成数据的笔记本；2）用于分析数据的笔记本。其中用于数据分析的笔记本需调整配置以正确导入数据。为辅助使用者完成操作，配套提供了ReadMe文档以指引完整流程。
本数据集存储的内容可分为三个子数据集包：
1. 弹簧模型数据集（Data - spring models.zip）：对应毕业设计第一部分提出的弹簧模型相关数据。
2. 球形多孔弹性模型数据集（Data – Spherical Poroelasticity Model.zip）：对应毕业设计附录中提出的球形多孔弹性模型相关数据。
3. 圆柱多孔弹性模型数据集（Data – Cylindrical Poroelasticity Model.zip）：对应毕业设计第二部分提出的圆柱多孔弹性模型相关数据。
每个子数据集文件夹下均包含如下数据：
- 弹簧模型数据集（Data - spring models.zip）：请查阅ReadMe-Information-Data.txt获取详细说明。该文件夹内的数据由笔记本`discrete3Dmodel-meanB-experimental3kDa.nb`生成，文件名中的数值分别代表转变前后Ka、Kb、Kc的取值。本数据集用于生成报告中的图3.3。
- 球形多孔弹性模型数据集（Data – Spherical Poroelasticity Model.zip）：包含球形水凝胶的典型仿真结果，具体分为以下子项：
1. 网格尺寸N=5影响版本：该文件夹内的数据由笔记本`Spherical-swelling-notebook.wl`结合文件夹内提供的参数生成，用于生成报告中《网格尺寸N=5的影响》章节的图C.2、C.3。
2. 化学势μ=0版本：该文件夹内的数据由笔记本`Spherical-swelling-notebook.wl`结合文件夹内提供的参数生成，用于生成报告中《化学势μ=0的影响》章节的图C.3。
3. 基础参数版本：该文件夹内的数据由笔记本`Spherical-swelling-notebook.wl`结合文件夹内提供的参数生成，用于生成报告中的图C.3。
- 圆柱多孔弹性模型数据集（Data – Cylindrical Poroelasticity Model.zip）：包含以下几类仿真数据：
1. 平衡动力学版本：该文件夹内的数据由笔记本`Cylinder-finalversion-annotated.wl`结合文件夹内提供的参数生成，用于生成报告中的图6.1至图6.4。
2. 各向异性参数版本：该文件夹内存储了不同各向异性参数对应的仿真数据，由笔记本`Cylinder-finalversion-annotated.wl`结合文件夹内提供的参数生成，用于生成报告中的图6.5至图6.7。
3. 相对湿度速率版本：该文件夹内存储了不同速率（即不同时间尺度）与不同网格点数对应的仿真数据，由笔记本`Cylinder-finalversion-annotated.wl`结合文件夹内提供的参数生成，用于生成报告中的图6.8至图6.10。
4. 转变过程版本：该文件夹内存储了不同特性转变过程对应的仿真数据，由笔记本`Cylinder-finalversion-annotated.wl`结合文件夹内提供的参数生成，用于生成报告中的图6.11至图6.14以及图E.1至图E.8。
报告中其余图表未显式存储数据，多数情况下可通过GitHub平台提供的对应笔记本直接生成。用于生成本数据集的GitHub官方版本可通过以下链接获取：https://github.com/QBraat/Cylindrical-Gel-Swelling/releases/tag/v1.0。