Experimental data generated on the study of triboelectrification of powder porous material during intrusion–extrusion process

/* ********** /* This work is licensed under a Creative Commons Attribution 4.0 International License. /* ********** Open access to experimental data generated by the project Electro-Intrusion (101017858, Horizon 2020, European Union) along with the research on the stability of hydrophobic porous materials to be used in intrusion-extrusion applications. Research pertaining to Task 2.1 (WP2). Underlying data for the publication Bartolomé, Luis et al. Triboelectrification During Water Intrusion–Extrusion into‐from Hydrophobic Nanopores. Advanced Materials Technologies 2024, 2401744. https://doi.org/10.1002/admt.202401744. Data related to Figures 3, 4, 5 and 6 in the article. The folder ‘HC8_Passive_DoubleElect’ contains the following: Experiments at room temperature (folder named ‘ROOM TEMP’) with different load resistances (folder named ‘LOAD RESIS’) at different compression/decompression rates (folder named 'RATE’) Experiments at temperature 5.5 ºC at different compression/decompression rates (Folder named ‘5p5_DEGREES’) The folder ‘FC8_Passive_DoubleElect’ contains the following: Experiment at room temperature Cycling experiment (folder named ‘CYCLING’) All the Excel files consist of four columns data obtained for the triboelectrification tests where first column is the time (named ‘Time*’), second one the voltage corresponding to the pressure (named ‘cDAQ1Mod1_ai1’), the third one the voltage of the experiment circuit (named ‘cDAQ1Mod1_ai3’) and the fourth one the current of the experiment circuit (‘cDAQ1Mod1_ai2’).本作品采用知识共享署名4.0国际许可协议进行许可。 本数据集为欧盟地平线2020（Horizon 2020）计划下电侵入（Electro-Intrusion，项目编号101017858）项目所生成的实验数据的开放获取资源，涵盖针对侵入-挤出（intrusion-extrusion）应用所用疏水多孔材料（hydrophobic porous materials）稳定性的相关研究内容，属于该项目工作包2（WP2）下任务2.1（Task 2.1）的相关研究成果。 本数据集为Bartolomé、Luis等人发表于《先进材料技术（Advanced Materials Technologies）》2024年的论文《水侵入-挤出疏水纳米孔（hydrophobic nanopores）过程中的摩擦起电（triboelectrification）现象》（论文编号2401744，DOI: 10.1002/admt.202401744）的配套基础数据，包含该论文中图3、图4、图5及图6对应的实验数据。 数据集包含两个主文件夹： 1. `HC8_Passive_DoubleElect`文件夹包含以下内容： - 室温实验（文件夹名`ROOM TEMP`）：该文件夹下包含不同负载电阻（子文件夹`LOAD RESIS`）与不同压缩/解压速率（子文件夹`RATE`）的实验数据； - 5.5℃下的不同压缩/解压速率实验（文件夹名`5p5_DEGREES`）。 2. `FC8_Passive_DoubleElect`文件夹包含以下内容： - 室温实验； - 循环实验（文件夹名`CYCLING`）。 所有Excel文件均存储摩擦起电（triboelectrification）测试的四列采集数据：第一列为时间（列名为`Time*`），第二列为对应压力的电压信号（列名为`cDAQ1Mod1_ai1`），第三列为实验电路的电压信号（列名为`cDAQ1Mod1_ai3`），第四列为实验电路的电流信号（列名为`cDAQ1Mod1_ai2`）。