Supplementary data for the conference paper: Experimental setup and method for the characterization of ply-ply adhesion for fiber-reinforced thermoplastics in melt

The dataset contains supplementary data for the ESAFORM 2023 conference paper entitled: 'Experimental setup and method for the characterization of ply-ply adhesion for fiber-reinforced thermoplastics in melt'. The dataset consists of inter-ply adhesion tests on UD C/LM-PAEK in melt using purpose-designed and built setup for the use in a rheometer at the University of Twente. The ply-ply adhesion experiments simulate the delamination between plies during actual hot press forming of thermoplastic matrix composite laminates. A ply-ply bond is created during a compression phase, after which a constant upward displacement is applied while the required normal force is measured. The design of the setup is described in the aformentioned conference article. Two series of tests were performed. The first series dealt with the repeatability of a test specimen in the setup, for which several specimens were tested repeatedly . The second series investigated the effect of the compression phase (both the compression time and the applied normal pressure). The used specimens and their conditions as well as the used Matlab scripts to analyze the data are included. The data is ordered in folders referring to the figures and table as presented in the aformentioned conference article.

本数据集为ESAFORM 2023会议论文《熔融态纤维增强热塑性复合材料层间黏附特性表征的实验装置与方法》的补充数据。数据集针对单向碳/低热模量聚醚醚酮（UD C/LM-PAEK）的熔融态层间黏附性能开展测试，所用实验装置为特文特大学（University of Twente）流变仪配套定制开发的专用装置。层间黏附实验模拟了热塑性基复合材料层合板实际热压成型过程中的层间剥离行为：先通过压缩阶段形成层间结合，随后施加恒定向上位移，同步测量所需法向载荷。该实验装置的设计细节已在上述会议论文中详述。本次实验共开展两组测试：第一组探究装置内试样的测试重复性，对多组试样进行了重复测试；第二组研究了压缩阶段的影响，涵盖压缩时长与施加的法向压力。数据集包含所用试样及其工况信息，以及用于数据分析的Matlab脚本。数据按文件夹分类，对应上述会议论文中展示的图表与表格。