Pompeii - Public Water Fountain 07

This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is placed outside I.16.4 and is made of grey peperino. The relief on the spout stone is a simple disc. This fountain is heavily restored - the spout stone was found alongside the fountain, and was only replaced in the last 15 or so years (Late 2000's early 2010's). More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2011604.htm The model was generated in Agisoft Metashape from 144 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab本公共饮水喷泉作为密苏里大学主办的2022年庞贝水与卫生项目野外实训课程的组成部分被扫描。该喷泉坐落于遗址编号I.16.4外侧，材质为灰色佩佩里诺凝灰岩（peperino）。喷口石表面的浮雕为简约圆盘造型。该喷泉经大规模修复——喷口石与喷泉本体一同被发现，仅在近15年左右（2000年代末至2010年代初）完成复位安装。更多影像资料可访问：https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2011604.htm 该三维模型由Agisoft Metashape基于144张尼康Z5（Nikon Z5）相机拍摄的照片生成。照片对齐与模型生成环节均采用高精度模式；模型已进行降采样处理以适配导出，并已处理为可用于3D打印的流形（manifold）模型。数据来源：Objaverse 1.0 / Sketchfab