Orientation Data of Faults and Fractures crossing the Ballık travertine (Denizli Basin, SW Turkey)

The data provided in this repository are:

1. Non-georeferenced fault and fracture orientation data measured in each quarry and provided in *.csv files for reproducibility. Type of measurement: Plane (P) orientation noted in dip direction (dd)/dip (d); Lineation (L) noted in in trend (tr) / plunge (pl). In the lists, a lineation following a plane is the lineation measured on that plane. See the accompanying kml, quarry list and Fig. 2 in the paper for location of the quarries.

2. Google EarthTM Kml-file (cf. Fig. 2) presenting all fault and travertine characteristics discussed in this study. All geomorphological faults surrounding the Ballık area are indicated. Yellow dots indicate the location of the different quarries. Yellow dots are fault observation points. Faults are mapped by connecting individual fault observations. Bedding orientation is indicated by coloured areas and correspond to bedding in Fig. 2: Green areas: S-dipping travertine; Purple: N-dipping travertine; Yellow areas: W-dipping travertine; Brown areas: Marl, sandstone or conglomerate cover deposits; Blue areas: subhorizontal travertine; Blue axis: travertine domal axis..

3. A list of quarry locations and fault type info. Quarries in the table are organised in same order as they are described in the text. NF = normal faulting, SS = newly-formed strike-slip faults, SS r. = reactivated normal faults with strike-slip kinematics.

本仓库提供的数据如下：
1. 非地理配准的断层与裂隙产状数据：该类数据采集自各采石场，以*.csv（逗号分隔值）文件格式存储以保障可复现性。测量类型分为两类：平面（Plane, P）产状，以倾向（dip direction, dd）/倾角（dip, d）记录；线理（Lineation, L）以走向（trend, tr）/倾伏角（plunge, pl）记录。列表中，紧随某一平面之后的线理，即为该平面上实测得到的线理。采石场的具体位置详见配套的KML文件、采石场清单以及论文中的图2。
2. Google Earth™ KML文件（参见论文图2），展示了本研究讨论的全部断层与钙华（travertine）特征。Ballık地区周边所有地貌断层均已标注。黄色圆点代表各采石场的位置，同时也是断层观测点。通过连接各单个断层观测点完成断层制图。层理产状以彩色区域表示，与图2中的层理一一对应：绿色区域为向南倾斜的钙华；紫色区域为向北倾斜的钙华；黄色区域为向西倾斜的钙华；棕色区域为泥灰岩、砂岩或砾岩覆盖层；蓝色区域为近水平产出的钙华；蓝色轴代表钙华穹窿轴。
3. 采石场位置与断层类型信息清单。表格内的采石场排序与正文中的描述顺序保持一致。其中NF代表正断层作用（normal faulting），SS代表新生走滑断层（newly-formed strike-slip faults），SS r.代表具有走滑运动学特征的活化正断层（reactivated normal faults with strike-slip kinematics）。