Laser ultrasonics data for Alpine Fault schist

This item contains the raw waveform data for a schist
sample, schist_2. Each .npy file contains all the experimental data,
including the waveforms (of the trigger channel and data channel) and
the angular positions of the rotation stage. Confining pressures for
these experiments ranged from 1MPa to 16MPa, as stated in the filename.
The data can be opened using the Python NumPy library.Also included are csv files which contain the arrival time picks of the P-wave in each waveform for each pressure.One
example experimental configuration file is included as config.json.
This describes the experimental setup at 1MPa, and is identical to the
config files at other pressures.Finally, the schist_2_rp_data.p is a Python pickle dictionary which contains values of
important variables for this sample, calculated from the experimental
data. These include fast and slow velocities, density, diameter,
anisotropy at all pressures, etc.All data
viewing of data, plotting, and analysis was performed with the Python
PlaceScan package, available at
https://github.com/jsimpsonUoA/PlaceScan. All experimental data was
acquired with PLACE, the lab automation software (see
https://github.com/PALab/place).

本项包含了片麻岩样品 schist_2 的原始波形数据。每个.npy文件均包含所有实验数据，包括触发通道和数据通道的波形以及旋转台的角度位置。实验所施加的约束压力范围从1MPa至16MPa，如文件名所示。数据可使用Python NumPy库打开。此外，还包含csv文件，其中包含每个压力下每个波形中P波的到达时间拾取。提供的一个示例实验配置文件为config.，它描述了1MPa下的实验设置，与其他压力下的配置文件相同。最后，schist_2_rp_data.p为Python pickle字典，其中包含从实验数据计算得出的该样品的重要变量值，包括快波和慢波速度、密度、直径以及所有压力下的各向异性等。所有数据查看、绘图和分析均使用Python PlaceScan包完成，该包可在https://github.com/jsimpsonUoA/PlaceScan获取。所有实验数据均由PLACE实验室自动化软件获取，详情请参阅https://github.com/PALab/place。