Raw data: A thermal infrared hyperspectral camera based on a birefringent interferometer

In this repository we publish the raw data for the paper "A thermal infrared hyperspectral camera based on a birefringent interferometer" Data types: QCLst5: motor positions used to sample the interferogram of QCL at 5.263 µm [mm]Int5: corresponding intensity values of the interferogram of QCL at 5.263 µm as absolute value of the trace of the lock-in detector connected to the MCT [arbitrary counts]t7: motor positions used to sample the interferogram of QCL at 7.675 µm [mm]Int7: corresponding intensity values of the interferogram of QCL at 7.675 µm as absolute value of the trace of the lock-in detector connected to the MCT [arbitrary counts]t9: motor positions used to sample the interferogram of QCL at 9.073 µm [mm]Int9: corresponding intensity values of the interferogram of QCL at 9.073 µm as absolute value of the trace of the lock-in detector connected to the MCT [arbitrary counts]t9_short: motor positions used to sample the interferogram of QCL at 9.073 µm (shorter scan with smaller step) [mm]Int9_short: corresponding intensity values of the interferogram of QCL at 9.073 µm as absolute value of the trace of the lock-in detector connected to the MCT (shorter scan with smaller step) [arbitrary counts] DFG_origtDFG: motor positions used to sample the DFG signal [mm]IntDFG: corresponding intensity values of the DFG signal as absolute value of the trace of the lock-in detector connected to the MCT [arbitrary counts] DFGtDFG: motor positions used to sample the DFG signal, delay corrected, cropped, and centered [mm]IntDFG: corresponding intensity values of the DFG signal as absolute value of the trace of the lock-in detector connected to the MCT, low-frequency corrected, inverted and normalized to the mean [arbitrary counts] Kanthal_origtKanthal: motor positions used to sample the Kanthal signal [mm]IntKanthal: corresponding intensity values of the Kanthal signal as absolute value of the trace of the lock-in detector connected to the MCT [arbitrary counts] KanthaltKanthal: motor positions used to sample the Kanthal signal [mm]IntKanthal: corresponding intensity values of the Kanthal signal as absolute value of the trace of the lock-in detector connected to the MCT, linearly detrended, inverted and normalized to the mean [arbitrary counts] Quartzt: motor positions used to sample the quartz emission [mm]HyperMatrix: temporal hypercube of the quartz emission containing one bolometer image for every motor position [arbitrary counts] Filterst_Filters: motor positions used to sample the filters transmitted light [mm]HyperMatrix_Filters: temporal hypercube of the filters transmitted light containing one bolometer image for every motor position [arbitrary counts] Hotplatet_Hotplate: motor positions used to sample the hotplate emission [mm]HyperMatrix_Hotplate: temporal hypercube of the hotplate emission containing one bolometer image for every motor position [arbitrary counts]本仓库发布了论文《基于双折射干涉仪的热红外高光谱相机》的原始实验数据。 数据类型： QCLst5：用于对波长5.263 µm的量子级联激光器（Quantum Cascade Laser，QCL）干涉图进行采样的电机位置[单位：mm] Int5：对应波长5.263 µm的QCL干涉图强度值，为连接至碲镉汞（Mercury Cadmium Telluride，MCT）探测器的锁相检测器（lock-in detector）输出迹线的绝对值[单位：任意计数] t7：用于对波长7.675 µm的QCL干涉图进行采样的电机位置[单位：mm] Int7：对应波长7.675 µm的QCL干涉图强度值，为连接至MCT探测器的锁相检测器输出迹线的绝对值[单位：任意计数] t9：用于对波长9.073 µm的QCL干涉图进行采样的电机位置[单位：mm] Int9：对应波长9.073 µm的QCL干涉图强度值，为连接至MCT探测器的锁相检测器输出迹线的绝对值[单位：任意计数] t9_short：用于对波长9.073 µm的QCL干涉图进行采样的电机位置（采用更小步长的短扫描）[单位：mm] Int9_short：对应波长9.073 µm的QCL干涉图强度值，为连接至MCT探测器的锁相检测器输出迹线的绝对值（采用更小步长的短扫描）[单位：任意计数] DFG_origtDFG：用于对差频产生（Difference Frequency Generation，DFG）信号进行采样的电机位置[单位：mm] IntDFG：对应差频产生信号的强度值，为连接至MCT探测器的锁相检测器输出迹线的绝对值[单位：任意计数] DFGtDFG：经过延迟校正、裁剪与居中处理的差频产生信号采样电机位置[单位：mm] IntDFG：对应差频产生信号的强度值，为连接至MCT探测器的锁相检测器输出迹线经低频校正、反相并归一化至均值后的绝对值[单位：任意计数] Kanthal_origtKanthal：用于对康塔尔（Kanthal）信号进行采样的电机位置[单位：mm] IntKanthal：对应康塔尔信号的强度值，为连接至MCT探测器的锁相检测器输出迹线的绝对值[单位：任意计数] KanthaltKanthal：用于对康塔尔信号进行采样的电机位置[单位：mm] IntKanthal：对应康塔尔信号的强度值，为连接至MCT探测器的锁相检测器输出迹线经线性去趋势、反相并归一化至均值后的绝对值[单位：任意计数] Quartzt：用于对石英发射信号进行采样的电机位置[单位：mm] HyperMatrix：石英发射信号的时间超立方体，包含每个电机位置对应的一张测辐射热计（bolometer）图像[单位：任意计数] Filterst_Filters：用于对滤光片透射光进行采样的电机位置[单位：mm] HyperMatrix_Filters：滤光片透射光的时间超立方体，包含每个电机位置对应的一张测辐射热计图像[单位：任意计数] Hotplatet_Hotplate：用于对热板发射信号进行采样的电机位置[单位：mm] HyperMatrix_Hotplate：热板发射信号的时间超立方体，包含每个电机位置对应的一张测辐射热计图像[单位：任意计数]