Modelling turbine-turbine interactions using techniques learned from Naval Engineering

DATASET INFORMATION - Dataset containing the CFD simulations presented in the conference paper "Modelling turbine-turbine interactions using techniques learned from Naval Engineering". - Simulations performed in Navigator HPC cluster, from the LAC laboratory of Universidade de Coimbra, under the project "Medium and High-Fidelity Aerodynamic Models for Wind Farm Power Optimization" (2022.15647.CPCA.A2), funded by FCCN and RNCA. - For any inquires, please contact João Muralha or Tiago Gomes. WIND TURBINE GEOMETRY - DTU10MW Model-Scale, from the UNAFLOW project experimental campaign in Politecnico di Milano's wind tunnel. - As described in "UNAFLOW: a holistic wind tunnel experiment about the aerodynamic response of floating wind turbines under imposed surge motion", DOI: 10.5194/wes-6-1169-2021 SIMULATIONS DESCRIPTION - CFD solver ReFRESCO 2023.1.0 - Unstructured hexahedral meshes generated using Hexpress: - AD: - grid0 - 4.7M cells - grid1 - 9.6M cells - grid2 - 15.6M cells - grid3 - 23.5M cells - MRF/SG: - grid0 - 17.8M cells - grid1 - 34.3M cells - grid2 - 49.0M cells - grid3 - 63.8M cells - Wind turbine modelling techniques: - Actuator Disk (AD) - Moving Reference Frame (MRF) - Sliding Grids (SG) - Inputs: - controls.xml (ReFRESCO input parameters) - Outputs: - Residuals - Courant number - Forces on surfaces of the turbine - Moments on surfaces of the turbine - y+ - Linear solver iterations - Velocity monitors in the wake (replicating UNAFLOWs hot-wires) - Volumetric flow data in CGNS format (only for ) Note: _unstd monitors include information for each non-linear iteration.数据集信息 - 本数据集包含会议论文《Modelling turbine-turbine interactions using techniques learned from Naval Engineering》中的计算流体动力学（Computational Fluid Dynamics, CFD）仿真结果。 - 仿真工作在葡萄牙科英布拉大学LAC实验室的Navigator高性能计算（High Performance Computing, HPC）集群上开展，依托由FCCN与RNCA资助的项目“面向风电场功率优化的中高保真气动模型”（项目编号：2022.15647.CPCA.A2）完成。 - 如有任何咨询，请联系若昂·穆拉利亚（João Muralha）或蒂亚戈·戈麦斯（Tiago Gomes）。 风力涡轮机几何构型 - 采用来自米兰理工大学风洞UNAFLOW项目实验研究的DTU10MW模型尺度涡轮机。 - 相关细节见于论文《UNAFLOW: a holistic wind tunnel experiment about the aerodynamic response of floating wind turbines under imposed surge motion》，DOI：10.5194/wes-6-1169-2021。 仿真设置说明 - CFD求解器采用ReFRESCO 2023.1.0。 - 采用Hexpress生成非结构化六面体网格： - AD： - grid0：470万单元 - grid1：960万单元 - grid2：1560万单元 - grid3：2350万单元 - MRF/SG： - grid0：1780万单元 - grid1：3430万单元 - grid2：4900万单元 - grid3：6380万单元 - 风力涡轮机建模技术包括： - 致动盘（Actuator Disk, AD） - 运动参考系（Moving Reference Frame, MRF） - 滑移网格（Sliding Grids, SG） - 输入文件： - controls.xml（ReFRESCO输入参数文件） - 输出结果： - 残差 - 库朗数（Courant number） - 涡轮机表面受力 - 涡轮机表面力矩 - y+值 - 线性求解器迭代次数 - 尾迹速度监测数据（复刻UNAFLOW项目的热线测速方案） - CGNS格式的体流动数据（仅适用于未明确指定的场景） 注：_unstd类型的监测数据包含每个非线性迭代步的相关信息。