BPA RUP subareas

This data is kept daily and is therefore always up to date Summary: The plans for construction are defined in the Urban Planning Act (Decree on Spatial Planning, coordinated on 22 October 1996); the regional plan, the general plan of construction (A.P.A.) and the special plan of construction (B.P.A.). A special plan of construction shall indicate, for the part of the municipal territory concerned: the existing situation; the detailed destination of different parts of the territory for habitation, industry, agriculture or any other use; the route of any changes to be made to the existing road network; rules on the location, size and prosperity of buildings and fences, as well as rules on courtyards and gardens. It may also indicate: rules on the construction and equipping of roads, strips free of construction and planting; places intended for the construction of green spaces, forest reserves, sports fields and cemeteries, as well as public buildings and monuments; if a land consolidation or reparcelling proves necessary, the boundaries of the new plots, stating that those boundaries may be changed by the aldermen's council with the approval of the Flemish Government. The regulations listed above may include property restrictions, including building bans. Where a regional, regional or general plan exists, the special plan shall conform to and supplement its instructions and provisions. It can deviate from it if necessary. Since the new Decree on Spatial Planning of 18 May 1999 (DRO), the former system of regional plan changes and BPAs has been replaced by the more flexible Spatial Implementation Plans (SIPs), which are drawn up by the 3 levels of authority, namely, municipality, province and region on the basis of the principle of subsidiarity, These plans are drawn up to implement the spatial structure plans and are therefore always drawn up from the perspective of a spatial structure plan, The latter are strategic policy plans that indicate for a certain planning period how the space of the territory concerned will be developed and managed, An RUP contains elements of destination, management and layout, This information is contained in urban planning regulations that apply to a piece of land and therefore have a spatial link (whether or not parcel-linked) The layer published here 'BPA-RUP-ground surface (current state)' is a digital vectorial version of the merged updated BPAs and RUPs for Antwerp and is best used in combination with the ferores of the original scanned analogue plans. The layer is part of a more extensive file composed of 9 layers, namely the BPA-RUP substrates, the overprints (in 2 layers based on whether or not geometrically accurate), the lines (in 2 layers based on whether or not geometrically accurate), the points (in 2 layers based on whether or not geometrically accurate), a layer for the possible sub-zones within the RUP and the BPA or RUP contour (part of the planning register) . Here, only the updated destination areas (the so-called 'ground colour' e.g., 'office zone') of the legally valid BPAs and RUPs are displayed and documented. This layer is by definition non-overlapping within the same BPA or RUP, (unlike the overprint layer which can contain overlapping parts). Structure lay according to directive on http://www2.vlaanderen.be/spatial/registers/digirups/digirups.html. For the municipal RUPs of Antwerp, the main destination is chosen from the list in the RUPs manual. (Coloring is also based on this) Purpose: The destination contours serve to support spatial planning and advice in Antwerp at all policy levels. It is an important information layer in the preparation, implementation and evaluation of the policy through spatial analysis, kartography, and automated file handling. Creation: Digitisation of the BPA destinations of the legally valid BPAs on the basis of scanned and georeferenced scans.Recent BPAs and Municipal RUPs are supplied in GIS format, The provincial and regional RUPs are required by decree in GIS supplied by the relevant government.本数据集每日维护更新，因此始终处于最新状态。 摘要：建设规划体系由《城市规划法》（Urban Planning Act）即1996年10月22日协调通过的《空间规划法令》（Decree on Spatial Planning）予以界定，具体包含区域规划、建设总规划（General Plan of Construction，缩写A.P.A.）以及建设专项规划（Special Plan of Construction，缩写B.P.A.）。 建设专项规划需针对所涉市域范围明确以下内容：现状概况；市域各区块的居住、工业、农业或其他用途的详细用地性质；现有道路网络的改造路线；建筑与围墙的选址、规模及管控规则，以及庭院、花园的管控要求。 此外，专项规划还可载明以下内容：道路建设与配套设施规则、禁止建设的地带及绿化种植要求；规划用于建设绿地、森林保护区、运动场、墓地以及公共建筑与纪念性设施的地块；若确需开展土地整理或地块重划，需明确新地块的边界，并注明该边界可经市议员委员会提请弗拉芒大区政府批准后进行调整。 上述管控规则可包含产权限制条款，包括建筑禁令。凡已制定区域规划、总规划者，建设专项规划需符合并补充其要求与规定；必要时可偏离其内容。 自1999年5月18日颁布的新《空间规划法令》（DRO）实施以来，原有的区域规划调整与建设专项规划（BPA）体系已被更具灵活性的空间实施规划（Spatial Implementation Plans，缩写SIPs）取代。该类规划由市镇、省与大区三级主管部门依据辅助性原则制定。 此类规划旨在落实空间结构规划，因此始终以空间结构规划为编制依据。空间结构规划属于战略性政策规划，需明确特定规划周期内所涉辖区的空间开发与管理路径。区域城市规划（Regional Urban Planning，缩写RUP）包含用地性质、管理要求与空间布局三类要素，相关信息载于适用于特定地块的城市规划管控规则中，因此具备空间关联性（无论是否与地块绑定）。 本次发布的“BPA-RUP-地表（现状）”图层，是安特卫普市合并更新后的建设专项规划（BPA）与区域城市规划（RUP）的数字矢量版本，建议结合原始扫描纸质规划图的相关要素进行使用。 该图层属于包含9个图层的完整数据集子集，具体包括：BPA-RUP基底图层、套印图层（按几何精度分为2个子图层）、线状要素图层（按几何精度分为2个子图层）、点状要素图层（按几何精度分为2个子图层）、区域城市规划（RUP）内潜在分区图层，以及建设专项规划（BPA）或区域城市规划（RUP）的轮廓图层（属于规划登记册的一部分）。 本图层仅展示并归档合法有效的建设专项规划（BPA）与区域城市规划（RUP）中更新后的用地性质区块（即所谓的“用地色块”，例如“办公区”）。根据定义，同一建设专项规划或区域城市规划范围内的本图层要素互不重叠（这与可包含重叠区域的套印图层不同）。 本图层的结构依据http://www2.vlaanderen.be/spatial/registers/digirups/digirups.html 中的指令制定。针对安特卫普市的区域城市规划（RUP），其主要用地性质从《RUP手册》所列清单中选取，配色规则亦遵循该清单。 应用场景：本用地性质轮廓图层可支撑安特卫普市各级政策层面的空间规划与咨询工作。其可通过空间分析、地图制图与自动化文件处理，为政策的编制、实施与评估提供重要的信息支撑。 制作流程：基于经扫描并完成地理配准的原图，对合法有效的建设专项规划（BPA）的用地性质进行数字化处理。最新的建设专项规划（BPA）与市镇级区域城市规划（RUP）以地理信息系统（Geographic Information System，缩写GIS）格式提供；省级与大区级区域城市规划（RUP）则依据法令要求，由相关主管部门以GIS格式提交。