Laser altimeter data obtained over sea-ice during the ARK-XXII/2 campaign in Aug-Sep, 2007; profile ARK-XXII-2_SBLA_20070806T1340_84.58_34.75_thr06_data_Vers5

Sea ice surface roughness data were obtained during the ARK-XXII/2 campaign in Aug-Sep, 2007 with a Single Beam Laser Altimeter (SBLA) mounted inside an electromagnetic system (EM-Bird) towed at 10-30 m height above surface by a Helicopter (RV-Polarstern Helicopter). A method developed by Hibler (1972) was used to a) isolate the surface profile from low-frequency variations associated with the aircraft motion and b) to identify pressure ridge sails. The processing steps are described in https://epic.awi.de/id/eprint/56364/. We applied a ridge detection threshold of 0.6 m, which means that only sails higher 0.6 m are detected. Version and name of the processing routine: Laser_Altimeter_Processing_VS5_06_20.py (vers.5, Feb 22, 2024, https://gitlab.awi.de/sitem/sbla_processing.git). SBLA records (RIEGL - LD90) are provided at a sampling rate of 100 Hz. Sensor accuracy is 5 cm with a beam diameter at surface of 5.8 cm. This specific dataset was obtained on 20070806T1340. It includes recorded altimeter readings, the derived surface elevation and width/height/spacing of detected pressure ridge sails. Note on data quality: 5.8 cm . File name: [DMS/PANGAEA Campaing Identifier] + [DEVICE] + [DATE/TIME] + [LAT/LON] + [Detection Threshold] + [Object] + [Version] + [Format]

海冰表面粗糙度数据采集于2007年8—9月的ARK-XXII/2科考航次，所用的单波束激光高度计（Single Beam Laser Altimeter, SBLA）集成于电磁系统EM-Bird中，该系统由极星号科考船搭载的直升机（RV-Polarstern Helicopter）以10—30米的飞行高度拖曳作业。本研究采用Hibler（1972）提出的方法完成两项核心处理：a）分离与飞行器运动相关的低频变化，提取地表剖面；b）识别冰脊帆（pressure ridge sails）。具体处理流程详见https://epic.awi.de/id/eprint/56364/。本次处理设置的冰脊检测阈值为0.6米，即仅识别高度不低于0.6米的冰脊帆。处理程序的版本与名称为Laser_Altimeter_Processing_VS5_06_20.py（版本5，2024年2月22日，代码仓库地址：https://gitlab.awi.de/sitem/sbla_processing.git）。SBLA传感器（RIEGL LD90）的采样率为100 Hz，传感器精度为5厘米，地表激光光斑直径为5.8厘米。本数据集的采集时间为20070806T1340，包含记录的高度计读数、衍生的地表高程数据，以及检测到的冰脊帆的宽度、高度与间距信息。数据质量说明：5.8厘米。文件名命名规则为：[DMS/PANGAEA科考航次标识] + [设备名称] + [日期/时间] + [经纬度] + [检测阈值] + [目标对象] + [版本号] + [文件格式]