UKCA model output using the CRI-Strat mechanism

Processed UKCA model output data to accompany "The Common Representative Intermediates Mechanism version 2 in the United<br> Kingdom Chemistry and Aerosols Model" by Scott Archer-Nicholls et al., to be published in the Journal of Advances in Modeling Earth Systems (JAMES), submitted 2020. Preprint available: https://www.essoar.org/doi/10.1002/essoar.10505092.1 Data has monthly averages over the 9 years of model integration (2010-2018) for all prognostic and diagnostic variables used for analysis in the main paper. The model was run with four separate suites, corresponding to the four main scenarios evaluated in the main paper and summarised in Table 4 of the paper. The suite codes match with the scenarios as follows: * bt518: CRI-Strat, the Base CRI scenario * bt564: StratTrop, the Base stratTrop scenario * bt680: CRI_Emiss_ST, the CRI-Strat scenario with StratTrop emissions, used for isolating the effect of chemical representation without changes to emissions * bp480: CRI_Emiss_C2C3, the CRI-Strat scenario with speciated C2-C3 emissions, used for isolating the effect of NMVOC speciation without changing the total emitted mass. Please see the README in the package for more information.本数据集为配合Scott Archer-Nicholls等人的研究论文《英国化学气溶胶模式（United Kingdom Chemistry and Aerosols Model，UKCA）中的通用代表性中间机理第2版》所配套的经处理模式输出数据，该论文于2020年投稿，将发表于《地球系统建模进展杂志》（Journal of Advances in Modeling Earth Systems，JAMES）。预印本可通过以下链接获取：https://www.essoar.org/doi/10.1002/essoar.10505092.1。 本数据集包含模式积分9年（2010-2018年）的逐月平均数据，涵盖主论文中用于分析的所有预报变量与诊断变量。本次模式运行采用四组独立的模拟配置方案，对应主论文中评估并在论文表4中总结的四种主要情景。配置方案代码与情景的对应关系如下： * bt518：CRI-Strat，即基准通用代表性中间机理（Common Representative Intermediates Mechanism，CRI）情景 * bt564：StratTrop，即基准平流层-对流层情景 * bt680：CRI_Emiss_ST，即采用StratTrop排放的CRI-Strat情景，用于分离化学表征的影响且不改变排放参数 * bp480：CRI_Emiss_C2C3，即采用分物种C2-C3排放的CRI-Strat情景，用于分离非甲烷挥发性有机化合物（Non-Methane Volatile Organic Compounds，NMVOC）分物种表征的影响且不改变总排放质量。 更多详细信息请参阅数据包中的README文件。