Thin walls and overhangs preview

The data is part of a study published in: Reijonen, J., Revuelta, A., Metsä-Kortelainen, S., Salminen, A. Effect of hard and soft re-coater blade on porosity and processability of thin walls and overhangs in laser powder bed fusion additive manufacturing. Int J Adv Manuf Technol (2023). https://doi.org/10.1007/s00170-023-12853-5 . Please refer to this article for all the experimental details; how the data was acquired, processed, and used. For any re-use of the data, please cite the original publication. The speciments are as follows [ID, blade type, features, orientation]:
- Ajo461_1, soft blade, thin walls, 0 deg
- Ajo461_2, soft blade, overhangs, 90 deg
- Ajo461_3, soft blade, thin walls, 90 deg
- Ajo461_4, soft blade, thin walls, 45 deg
- Ajo461_5 soft blade, overhangs, 0 deg
- Ajo463_1, hard blade, thin walls, 0 deg
- Ajo463_2, hard blade, overhangs, 90 deg
- Ajo463_3, hard blade, thin walls, 90 deg
- Ajo463_4, hard blade, thin walls, 45 deg
- Ajo463_5, hard blade, overhangs, 0 deg

Preview of PAS-dataset https://doi.org/10.23729/b5d7b781-86e6-4794-b9ff-1a3cbf7e8548

本数据集隶属于一项已发表的学术研究：Reijonen, J.、Revuelta, A.、Metsä-Kortelainen, S.、Salminen, A. 发表于《国际先进制造技术期刊》（*Int J Adv Manuf Technol*）2023年的论文《软硬铺粉刮刀（re-coater blade）对激光粉末床熔融增材制造薄壁与悬垂结构孔隙率及加工性能的影响》，DOI: 10.1007/s00170-023-12853-5。
有关全部实验细节，包括数据的采集、处理与应用方式，请参阅该原始论文。若需对本数据集进行二次复用，请引用该原创研究文献。
样本信息如下[ID, 刮刀类型, 结构特征, 摆放方位]：
- Ajo461_1, 软刮刀, 薄壁结构, 0°
- Ajo461_2, 软刮刀, 悬垂结构, 90°
- Ajo461_3, 软刮刀, 薄壁结构, 90°
- Ajo461_4, 软刮刀, 薄壁结构, 45°
- Ajo461_5, 软刮刀, 悬垂结构, 0°
- Ajo463_1, 硬刮刀, 薄壁结构, 0°
- Ajo463_2, 硬刮刀, 悬垂结构, 90°
- Ajo463_3, 硬刮刀, 薄壁结构, 90°
- Ajo463_4, 硬刮刀, 薄壁结构, 45°
- Ajo463_5, 硬刮刀, 悬垂结构, 0°
PAS数据集预览：https://doi.org/10.23729/b5d7b781-86e6-4794-b9ff-1a3cbf7e8548