Dynamic and quasi-static indentation tests in Steel, Copper, Brass and Titanium plates

Mechanical indentation tests performed in Steel, Copper, Brass and Titanium plate specimens using a rigid spherical indenter (1.0 mm diameter) considering two velocity regimes:
1- Dynamic tests: Raw and processed data of mechanical indentation tests performed by drop weight machine at indentation test velocities around 1000 mm/s.
2- Quasi-static tests: Raw and processed data of mechanical indentation tests performed in an universal testing machine with indentation test velocities from 0.0001 to 1.0 mm/s.

本数据集针对钢板、铜板、黄铜板及钛板试样开展机械压痕试验，试验采用直径1.0 mm的刚性球形压头（rigid spherical indenter），并设置两类速度工况：
1. 动态试验：采用落锤试验机开展的机械压痕试验原始与处理后数据，对应压痕试验速度约为1000 mm/s。
2. 准静态试验：采用万能试验机开展的机械压痕试验原始与处理后数据，对应压痕试验速度范围为0.0001 mm/s至1.0 mm/s。