CNRM-CERFACS CNRM-CM6-1-HR model output prepared for CMIP6 HighResMIP

Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets: These data include all datasets published for 'CMIP6.HighResMIP.CNRM-CERFACS.CNRM-CM6-1-HR' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The CNRM-CM6-1-HR climate model, released in 2017, includes the following components: aerosol: prescribed monthly fields computed by TACTIC_v2 scheme, atmos: Arpege 6.3 (T359; Gaussian Reduced with 181724 grid points in total distributed over 360 latitude circles (with 720 grid points per latitude circle between 32.2degN and 32.2degS reducing to 18 grid points per latitude circle at 89.6degN and 89.6degS); 91 levels; top level 78.4 km), atmosChem: OZL_v2, land: Surfex 8.0c, ocean: Nemo 3.6 (eORCA025, tripolar primarily 1/4deg; 1442 x 1050 longitude/latitude; 75 levels; top grid cell 0-1 m), seaIce: Gelato 6.1. The model was run by the CNRM (Centre National de Recherches Meteorologiques, Toulouse 31057, France), CERFACS (Centre Europeen de Recherche et de Formation Avancee en Calcul Scientifique, Toulouse 31057, France) (CNRM-CERFACS) in native nominal resolutions: aerosol: 100 km, atmos: 100 km, atmosChem: 100 km, land: 100 km, ocean: 25 km, seaIce: 25 km. Project: These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. - Project website: https://pcmdi.llnl.gov/CMIP6.

耦合模型比较计划第六阶段（Coupled Model Intercomparison Project Phase 6，CMIP6）数据集：本数据集包含所有针对`CMIP6.HighResMIP.CNRM-CERFACS.CNRM-CM6-1-HR`发布的数据集，且遵循完整的数据引用语法模板`mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version`。CNRM-CM6-1-HR气候模式于2017年发布，包含以下组成模块：气溶胶模块采用TACTIC_v2方案计算的逐月强迫场；大气模块为Arpege 6.3（T359网格；采用高斯缩减网格布局，总计181724个网格点，分布于360条纬度圈：南北纬32.2°区间内每条纬度圈含720个网格点，向南北纬89.6°处逐步缩减至每条纬度圈仅18个网格点；共计91层垂直结构，顶层高度达78.4 km）；大气化学模块为OZL_v2；陆面模块为Surfex 8.0c；海洋模块为Nemo 3.6（eORCA025网格，以三极式1/4°分辨率为核心设计；经纬度网格尺寸为1442×1050；共计75层垂直结构，顶层网格单元深度范围为0~1 m）；海冰模块为Gelato 6.1。该模式由法国图卢兹的法国国家气象研究中心（Centre National de Recherches Meteorologiques，CNRM）与欧洲科学计算高级研究与培训中心（Centre Europeen de Recherche et de Formation Avancee en Calcul Scientifique，CERFACS，合称CNRM-CERFACS）以原生标称分辨率完成运行：气溶胶模块分辨率为100 km，大气模块为100 km，大气化学模块为100 km，陆面模块为100 km，海洋模块为25 km，海冰模块为25 km。本数据集作为国际协同推进的耦合模型比较计划第六阶段（CMIP6；详见《地球科学模式发展》特刊：http://www.geosci-model-dev.net/special_issue590.html）的产出成果生成。该模拟数据可为解答气候科学核心问题的研究提供支撑，同时作为政府间气候变化专门委员会第六次评估报告（Sixth Assessment Report of the Intergovernmental Panel on Climate Change，IPCC-AR6）作者群体的参考资源。CMIP6由耦合模拟工作组（Working Group on Coupled Modelling，WGCM）作为世界气候研究计划（World Climate Research Programme，WCRP）的子项目统筹协调。第六阶段继承了此前由气候模型诊断与比较计划（Program for Climate Model Diagnosis and Intercomparison，PCMDI）主导的前期项目成果，依托地球系统网格联合会（Earth System Grid Federation，ESGF）与环境数据分析中心（Centre for Environmental Data Analysis，CEDA）开展建设，并配套众多相关实施活动。原始数据托管于分布式数据节点集群并进行部分副本存储，IPCC所依赖的多数数据将由德国气候计算中心（German Climate Computing Center，DKRZ）运维的IPCC数据分发中心（IPCC DDC）进行长期归档保存。该项目汇聚了全球约120个全球气候模式与近45家科研机构及组织的模拟成果。项目官网：https://pcmdi.llnl.gov/CMIP6。