NP-TRAP v1 – 3D-Printing Files (OpenSCAD, DXF, STL) for In-Situ Microbial Cultivation

Parametric CAD pack and companion materials for the NP-TRAP v1 honeycomb device (12 × 12 cm; 56 wells) for in-situ microbial cultivation. The repository provides editable OpenSCAD source plus DXF layouts so others can readily prototype, test, and adapt the design; it also includes the draft manuscript PDF and 300 dpi figures (exploded view, plate layout/dimensions, valve concept). Contents NP-TRAP_v1_parametric.scad (parametric model: top/culture/capture/valve-cap layers) *.dxf (honeycomb/top-through, valve-cap with duckbill seats + side port, gasket) NP-TRAP_v1_hex_centers_mm.csv (well-center coordinates) README_NP-TRAP_v1_CAD.txt (build/export/printing notes) Draft manuscript PDF and Figures 1–4 (300 dpi) How to useOpen .scad in OpenSCAD → render (F6) → export STL. Prototype in PETG/ABS; for field use prefer PP/PC/PEEK; gaskets in ePTFE/silicone (0.5–1.0 mm); M5 hardware. See README for tolerances and simple leak/valve tests. MetadataVersion: v1.0 • License: CC BY 4.0 • Upload type: Dataset • Keywords: NP-TRAP, in-situ cultivation, honeycomb, OpenSCAD, DXF, STL, microfluidics, 3D printing.Author: Maxwel Adriano Abegg (ORCID: 0000-0002-0328-1122).Related identifier: IsSupplementTo → [manuscript DOI, when available].本数据集包含用于原位微生物培养的NP-TRAP v1型蜂窝装置（规格12×12厘米，含56个培养孔）的参数化计算机辅助设计（CAD）套件及配套资料。本数据集仓库提供可编辑的OpenSCAD源文件与DXF（绘图交换格式）布局文件，便于其他研究者快速开展原型制作、测试及设计修改；同时包含手稿初稿PDF文档与分辨率为300 dpi的配套插图（含爆炸视图、培养板布局与尺寸参数、阀件结构示意图）。 数据集内容 NP-TRAP_v1_parametric.scad：参数化模型文件，涵盖盖板层、培养腔层、捕获层与阀盖层 *.dxf文件组：包含蜂窝结构、贯通式盖板、带鸭嘴式阀座与侧端口的阀盖以及密封垫片的布局文件 NP-TRAP_v1_hex_centers_mm.csv：包含各培养孔中心坐标的毫米级坐标文件 README_NP-TRAP_v1_CAD.txt：包含模型构建、文件导出及3D打印注意事项的说明文档 手稿初稿PDF文档及1至4号插图（分辨率300 dpi） 使用方法：在OpenSCAD软件中打开.scad格式文件，通过渲染操作（快捷键F6）后导出STL（标准镶嵌语言）格式文件。原型制作可采用PETG、ABS材料；野外应用场景推荐使用PP、PC、PEEK材料；密封垫片推荐采用ePTFE、硅胶材料（厚度范围0.5–1.0 mm）；配套紧固件为M5规格。公差参数与简易检漏、阀件测试方法详见README文档。 元数据 版本：v1.0 • 授权协议：CC BY 4.0 • 上传类型：数据集 • 关键词：NP-TRAP、原位微生物培养、蜂窝结构、OpenSCAD、DXF、STL、微流控、3D打印。作者：马克斯韦尔·阿德里亚诺·阿贝格（ORCID：0000-0002-0328-1122）。关联标识：IsSupplementTo → [待提供的手稿DOI]。