Additional file 6 of Floral infrared emissivity estimates using simple tools

Additional file 6. Thermocouple estimation extracted data. The full data extracted from thermal images and the emissivity estimates from the thermocouple protocol. Column headings are as follows: ‘measurement’ a name identifier for each flower measurement. ‘Individual within species’ the numerical identifier of individual flowers within each species numbers are shared across species, this is used for flower identification not for analysis. ‘Individual’ numerical identifier of flower individual across all species. ‘Species’ the flower species. ‘measurement location’ the measurement location, here reproductive structures are indicated as ‘A: repro struc’, petal base as ‘B: petal base’, petal edge as ‘C: petal edge’. ‘temp on thermocouple = Tobj’ the thermocouple reading of flower temperature in degrees Celsius at the measurement indicated by the previous columns. ‘Tobj (k)’ the thermocouple reading of flower temperature in degrees Kelvin at the measurement indicated by the previous columns. ‘Tref’ the reflected temperature at the measurement indicated by previous columns. ‘at e = 1 d = 0, Temp uncorrected (for W)’ the apparent temperature at measurement indicated by the previous columns. ‘at e = 0.98 d = 0.5’ the camera’s temperature measurement, in kelvin, when emissivity was 0.98 at the measurement indicated by the previous columns. ‘DeltaTobj-T0.98’ the ‘Tobj (k)’ measurement minus that of the thermal camera when emissivity was 0.98 (‘at e = 0.98 d = 0.5’). ‘Ecal’ and ‘Esolve’ the calculated and Solver emissivity estimates respectively at the measurement indicated by the previous columns. ‘DeltaE’ the difference between calculated and Solver emissivity estimates at measurement indicated by the previous columns.

补充文件6：热电偶（thermocouple）估算提取数据集。本数据集包含从热成像图（thermal images）中提取的完整数据，以及基于热电偶规程得到的发射率（emissivity）估算值。各列标题说明如下：
1. `measurement`：每朵花测量项的名称标识符。
2. `Individual within species`：同一物种内单朵花的数字标识符，不同物种间编号通用，仅用于花朵识别，而非分析用途。
3. `Individual`：覆盖全部物种的单朵花数字标识符。
4. `Species`：花所属物种。
5. `measurement location`：测量位点，其中繁殖结构标注为"A: repro struc"（即A：繁殖结构），花瓣基部标注为"B: petal base"（即B：花瓣基部），花瓣边缘标注为"C: petal edge"（即C：花瓣边缘）。
6. `temp on thermocouple = Tobj`：对应前述列所指定测量位点的热电偶花朵温度读数，单位为摄氏度（℃）。
7. `Tobj (k)`：对应前述列所指定测量位点的热电偶花朵温度读数，单位为开尔文（K）。
8. `Tref`：对应前述列所指定测量位点的反射温度。
9. `at e = 1 d = 0, Temp uncorrected (for W)`：对应前述列所指定测量位点的未针对W项校正的表观温度。
10. `at e = 0.98 d = 0.5`：对应前述列所指定测量位点、发射率设置为0.98时的相机温度测量值，单位为开尔文（K）。
11. `DeltaTobj-T0.98`：`Tobj (k)`的测量值与发射率为0.98时的热成像相机测量值（即`at e = 0.98 d = 0.5`）的差值。
12. `Ecal`与`Esolve`：分别为对应前述列所指定测量位点的计算发射率估算值与求解器发射率估算值。
13. `DeltaE`：对应前述列所指定测量位点的计算发射率估算值与求解器发射率估算值的差值。