The influence of the strengthening processes and chemical etching on the surface properties of Ti Grade 2 and Ti-13Nb-13Zr alloy for biomedical applications

The influence of the strengthening processes and chemical etching on the surface properties of Ti Grade 2 and Ti-13Nb-13Zr alloy for biomedical applications Agnieszka Kowalczyk, Jarosław Pura, Agata Sotniczuk, Marta Zwolińska, Bogusława Adamczyk-Cieślak, Halina Garbacz This record contains all files generated in the preparation process of the following publication: Agnieszka Kowalczyk, Jarosław Pura, Agata Sotniczuk, Marta Zwolińska, Bogusława Adamczyk-Cieślak, Halina Garbacz,"The influence of the strengthening processes and chemical etching on the surface properties of Ti Grade 2 and Ti-13Nb-13Zr alloy for biomedical applications", submitted to Journal of Materials Research and Technology. Designations: Ti Grade 2 and Ti G2 - commercially pure titanium Grade 2TNZ- - Ti-13Nb-13Zr alloy -IS- - initial state-CR- - sample cold-rolled with the reduction in the rod thickness of 90%-G- - sample grinded on #600 grit abrasive paper-SP- - sample shot-peened -E- - samples etched (solutions: HF - hydrofluoric acid, Kroll - diluted Kroll's solution, NaOH - sodium hydroxide)TEM - Transmission Electron MicroscopySEM - Scanning Electron Microscopy XRD - X-ray diffraction Folders content: Corrosion - files with data of corrosion tests, obtained from electrochemical testsMicrohardness - results from the microhardness tests of the samplesSEM - images of sample surfaces from Scanning Electron Microscope TEM - results from Transmission Electron MicroscopyTopography - files with data of samples' topography and roughness from the optical profilometerXRD - data of XRD analysis This research was supported financially by the National Science Centre, Poland under the grant OPUS 23 [2022/45/B/ST5/03398].《强化工艺与化学刻蚀对生物医用Ti Grade 2及Ti-13Nb-13Zr合金表面性能的影响》 作者：Agnieszka Kowalczyk、Jarosław Pura、Agata Sotniczuk、Marta Zwolińska、Bogusława Adamczyk-Cieślak、Halina Garbacz 本数据集包含下述学术论文筹备过程中生成的全部文件： Agnieszka Kowalczyk, Jarosław Pura, Agata Sotniczuk, Marta Zwolińska, Bogusława Adamczyk-Cieślak, Halina Garbacz,《强化工艺与化学刻蚀对生物医用Ti Grade 2及Ti-13Nb-13Zr合金表面性能的影响》，已投稿至《材料研究与技术期刊（Journal of Materials Research and Technology）》。 标识说明： - Ti Grade 2与Ti G2：2级商用纯钛（commercially pure titanium Grade 2） - TNZ：Ti-13Nb-13Zr合金（Ti-13Nb-13Zr alloy） - -IS-：初始态（initial state） - -CR-：经90%棒材厚度压下率冷轧的试样（sample cold-rolled with the reduction in the rod thickness of 90%） - -G-：经#600号砂纸研磨的试样（sample grinded on #600 grit abrasive paper） - -SP-：喷丸处理试样（sample shot-peened） - -E-：刻蚀试样，所用刻蚀液包括：HF（氢氟酸，hydrofluoric acid）、Kroll（稀释克氏溶液，diluted Kroll's solution）、NaOH（氢氧化钠，sodium hydroxide） - TEM：透射电子显微镜（Transmission Electron Microscopy） - SEM：扫描电子显微镜（Scanning Electron Microscopy） - XRD：X射线衍射（X-ray diffraction） 文件夹内容： - 腐蚀测试（Corrosion）：包含电化学腐蚀测试所得数据的文件 - 显微硬度测试（Microhardness）：试样显微硬度测试结果 - SEM：扫描电子显微镜拍摄的试样表面图像 - TEM：透射电子显微镜测试结果 - 表面形貌（Topography）：光学轮廓仪测得的试样表面形貌与粗糙度数据文件 - XRD：X射线衍射分析数据 本研究获波兰国家科学中心OPUS 23项目[2022/45/B/ST5/03398]资助。