EC-Earth-Consortium EC-Earth3 model output prepared for CMIP6 ScenarioMIP ssp534-over

Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets: These data include all datasets published for 'CMIP6.ScenarioMIP.EC-Earth-Consortium.EC-Earth3.ssp534-over' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'.

The EC Earth 3.3 climate model, released in 2019, includes the following components:
atmos: IFS cy36r4 (TL255, linearly reduced Gaussian grid equivalent to 512 x 256 longitude/latitude; 91 levels; top level 0.01 hPa), land: HTESSEL (land surface scheme built in IFS), ocean: NEMO3.6 (ORCA1 tripolar primarily 1 deg with meridional refinement down to 1/3 degree in the tropics; 362 x 292 longitude/latitude; 75 levels; top grid cell 0-1 m), seaIce: LIM3.
The model was run by the AEMET, Spain; BSC, Spain; CNR-ISAC, Italy; DMI, Denmark; ENEA, Italy; FMI, Finland; Geomar, Germany; ICHEC, Ireland; ICTP, Italy; IDL, Portugal; IMAU, The Netherlands; IPMA, Portugal; KIT, Karlsruhe, Germany; KNMI, The Netherlands; Lund University, Sweden; Met Eireann, Ireland; NLeSC, The Netherlands; NTNU, Norway; Oxford University, UK; surfSARA, The Netherlands; SMHI, Sweden; Stockholm University, Sweden; Unite ASTR, Belgium; University College Dublin, Ireland; University of Bergen, Norway; University of Copenhagen, Denmark; University of Helsinki, Finland; University of Santiago de Compostela, Spain; Uppsala University, Sweden; Utrecht University, The Netherlands; Vrije Universiteit Amsterdam, the Netherlands; Wageningen University, The Netherlands. Mailing address: EC-Earth consortium, Rossby Center, Swedish Meteorological and Hydrological Institute/SMHI, SE-601 76 Norrkoping, Sweden (EC-Earth-Consortium) in native nominal resolutions: atmos: 100 km, land: 100 km, ocean: 100 km, seaIce: 100 km.

Project: These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6).

CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ).

The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. - Project website: https://pcmdi.llnl.gov/CMIP6.

耦合模型比较计划第六阶段（Coupled Model Intercomparison Project Phase 6，CMIP6）数据集：本数据集包含所有发布于`CMIP6.ScenarioMIP.EC-Earth-Consortium.EC-Earth3.ssp534-over`的数据集，其完整数据引用语法遵循模板`mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version`。

2019年发布的EC-Earth 3.3气候模式包含以下组成模块：大气模块采用IFS cy36r4（TL255，线性缩减高斯网格，等效分辨率为512×256经纬度格点，共91层，顶层气压为0.01 hPa）；陆面模块采用HTESSEL（集成于IFS的陆面过程方案）；海洋模块采用NEMO3.6（ORCA1三极网格，基础分辨率约1°，热带区域经向加密至1/3°，格点尺寸为362×292经纬度，共75层，顶层网格深度范围0~1 m）；海冰模块采用LIM3。

该模式由以下多家机构联合运行：西班牙国家气象局（AEMET）、西班牙加泰罗尼亚气候与大气科学中心（BSC）、意大利国家研究委员会大气科学与气候研究所（CNR-ISAC）、丹麦气象研究所（DMI）、意大利国家新技术、能源与可持续经济发展局（ENEA）、芬兰气象研究所（FMI）、德国基尔海洋研究中心（Geomar）、爱尔兰欧洲计算与高级模拟中心（ICHEC）、意大利国际理论物理中心（ICTP）、葡萄牙环境与可持续发展研究所（IDL）、荷兰瓦赫宁根大学大气研究所（IMAU）、葡萄牙气象局（IPMA）、德国卡尔斯鲁厄理工学院（KIT）、荷兰皇家气象研究所（KNMI）、瑞典隆德大学（Lund University）、爱尔兰气象局（Met Eireann）、荷兰国家应用科学研究中心计算科学部（NLeSC）、挪威科技大学（NTNU）、英国牛津大学（Oxford University）、荷兰surfSARA超级计算中心、瑞典气象与水文研究所（SMHI）、瑞典斯德哥尔摩大学（Stockholm University）、比利时ASTR研究组（Unite ASTR）、爱尔兰都柏林大学学院（University College Dublin）、挪威卑尔根大学（University of Bergen）、丹麦哥本哈根大学（University of Copenhagen）、芬兰赫尔辛基大学（University of Helsinki）、西班牙圣地亚哥德孔波斯特拉大学（University of Santiago de Compostela）、瑞典乌普萨拉大学（Uppsala University）、荷兰乌得勒支大学（Utrecht University）、荷兰阿姆斯特丹自由大学（Vrije Universiteit Amsterdam）、荷兰瓦赫宁根大学（Wageningen University）。通信地址：EC-Earth联盟，瑞典罗斯比中心，瑞典气象与水文研究所/SMHI，SE-601 76 北雪平，瑞典（EC-Earth-Consortium）。模式原生标称分辨率为：大气模块100 km，陆面模块100 km，海洋模块100 km，海冰模块100 km。

本数据集作为国际协同推进的耦合模型比较计划第六阶段（CMIP6；详见《地球科学模式发展》特刊：http://www.geosci-model-dev.net/special_issue590.html）的产出成果生成。该模拟数据为解答核心科学问题的气候研究提供支撑，同时可作为政府间气候变化专门委员会第六次评估报告（IPCC-AR6）作者的参考资源。

CMIP6由耦合模拟工作组（Working Group on Coupled Modelling，WGCM）作为世界气候研究计划（World Climate Research Programme，WCRP）的一部分统筹协调。第六阶段继承了此前由气候模型诊断与比较计划（Program for Climate Model Diagnosis and Intercomparison，PCMDI）主导的前序阶段成果，依托地球系统网格联盟（Earth System Grid Federation，ESGF）与英国环境数据分析中心（Centre for Environmental Data Analysis，CEDA）及众多相关活动完成落地实施。

原始数据存储于分布式数据节点网络并进行部分复制，IPCC依赖的多数数据将由德国气候计算中心（DKRZ）托管的IPCC数据分发中心（IPCC DDC）进行长期归档保存。

该项目汇聚了全球约120个全球气候模式与45家左右的科研机构及组织。项目官网：https://pcmdi.llnl.gov/CMIP6。