TRIPLE IceCraft Abisko Salinity Data

Before diving into the data, please refer to the description of the IceCraft system and the TRIPLE project. The data uploaded here describes the variation of salinity with depth. The salinity was measured using a conductivity meter. As the salinity of water increases, so as the conductivity of water. The conductivity meter was immersed in water to measure how easily electrical current flows through it. The conductivity values are converted into salinity using established empirical formulas, as can be found here. The measurement was performed continuously on the water produced by melting ice, as the IceCraft was moving downwards. During the mission, no anomaly was observed regarding the measurement. The SOPs followed during the measurements can be found here. These salinity measurements can be used to calculate the ice porosity using empirical formulas as found here. keywords: Salinity, Porosity在查阅本数据集前，请先参阅IceCraft系统与TRIPLE项目的相关说明。 本上传数据集记录了盐度（Salinity）随深度的变化情况。本次盐度测量采用电导仪（conductivity meter）完成：水体盐度越高，其导电率也随之升高。将电导仪浸没于水中，以检测电流在水体中的流通难易程度。通过已确立的经验公式（可在此处查阅），可将测得的导电率数值转换为盐度值。在IceCraft向下移动的过程中，研究人员对融冰生成的水体开展了连续测量，本次任务期间测量过程未出现任何异常情况。测量过程中遵循的标准作业程序（Standard Operating Procedure, SOP）可在此处查阅。借助此处给出的经验公式，可基于本次盐度测量结果计算冰孔隙率（Porosity）。 关键词：盐度、孔隙率