Self-sensing active tool vibration control input signals

1. File 1 is a tangential cutting force signal frequency-shifted to 2050Hz bending mode and sampled at 15kHz. Static force component removed. 2. File 2 is the signal of file 1 filtered with band-pass of 100Hz bandwidth with 2050 Hz center frequency and resampled at 100kHz. Static force component removed. 3. File 3 is the signal of file 1 filtered with band-pass of 200Hz bandwidth with 2050 Hz center frequency and resampled at 100kHz. Static force component removed.1. 文件1为频移至2050Hz弯曲模态的切向切削力信号，采样率为15kHz，已移除静态力分量。 2. 文件2为对文件1的信号采用中心频率2050Hz、带宽100Hz的带通滤波处理后，以100kHz采样率重采样得到的信号，已移除静态力分量。 3. 文件3为对文件1的信号采用中心频率2050Hz、带宽200Hz的带通滤波处理后，以100kHz采样率重采样得到的信号，已移除静态力分量。