3D scanning of NYALES20 full data set

Information about data The folder contains all raw data acquired during the measurement week. The data format is the output from the Leica scanner where no additional data processing have been applied. Additional information on each scan is included in the Excel file "Register&metadata raw Scans.xlsx" In addition to the 3D scanner, an ILR device with attached accelerometer and temperature sensor was mounted on the telescope at the beginning of the week, and removed after the last scan was aquired. Distance data from this is available in the Excel file "ILR data alla datas.xlsx". This file also include results from a previous measurement of the telescope using a total-station. All data are free to use for analysis under licence CC-BY-SA 4.0 International. If there is a need for clarifications of the data, questions can be sent as a request on the Zenodo Community.数据集说明 本文件夹包含测量周期间采集的全部原始数据，所有数据均为徕卡（Leica）扫描仪的原生输出结果，未经过任何额外的数据处理。 每份扫描数据的补充信息已收录于Excel文件"Register&metadata raw Scans.xlsx"中。 除3D扫描仪外，一台集成加速度计与温度传感器的ILR设备于测量周初始阶段被安装在望远镜上，并于最后一次扫描完成后拆除。该设备的距离数据已收录于Excel文件"ILR data alla datas.xlsx"中，该文件还包含此前使用全站仪（total-station）对该望远镜进行测量所得的结果。 所有数据均可在CC-BY-SA 4.0国际许可协议下免费用于分析研究。 若需对本数据集进行相关澄清，可通过Zenodo社区提交请求咨询相关问题。