曳引驱动载货电梯监督检验收费计算数据

曳引驱动载货电梯监督检验收费计算是根据电梯的具体情况，包括电梯的额定载重量、额定速度、层/站/门数等因素，来确定检验费用的金额。它能够为电梯使用单位提供合理的收费依据，为电梯检验机构提供方便准确的收费标准。1、数据采集：收集电梯额定载重量、额定速度、电梯层/站/门数、检验种类等参数。2、数据处理：首先根据额定速度v≤1，vx=0；1＜v≤1.75，vx=0.1；1.75＜v≤2.5，vx=0.15；v＞2.5,vx=2确定额定速度系数。根据额定载重量t≤1000，tx=0;1000＜t≤2000，tx=0.1;t＞2000，tx=0.15确定额定载重量系数。检验种类系数，安装监检为2，改造监检和大修监检为1.5。是否进口系数，是为1.5，否为1。3、套用算法公式计算：曳引驱动载货电梯监督检验收费实收金额=（收费标准*（1+额定载重量系数+额定速度系数）+（【层/站/门三个参数中的最大值】-5）*80）*检验种类*是否进口，其中，【层/站/门三个参数中的最大值】如果三个参数最大值小于5则按5算。

The calculation of supervisory inspection fees for traction-driven freight elevators determines the total inspection cost based on specific elevator parameters, including rated load capacity, rated speed, floor/stop/door count and other relevant factors. This calculation framework can provide a reasonable charging basis for elevator usage units and a convenient and accurate charging standard for elevator inspection institutions.

1. Data Collection: Collect parameters such as elevator rated load capacity, rated speed, floor/stop/door count, inspection type, etc.

2. Data Processing: First, determine the rated speed coefficient vx according to the following rules: when v ≤ 1, vx=0; when 1 < v ≤ 1.75, vx=0.1; when 1.75 < v ≤ 2.5, vx=0.15; when v > 2.5, vx=2. Then determine the rated load coefficient tx based on the following rules: when t ≤ 1000, tx=0; when 1000 < t ≤ 2000, tx=0.1; when t > 2000, tx=0.15. For the inspection type coefficient, the value is 2 for installation supervision inspection, and 1.5 for both reconstruction supervision inspection and overhaul supervision inspection. For the import coefficient, the value is 1.5 for imported elevators and 1 for domestic elevators.

3. Algorithm Application and Calculation: The actual collected supervisory inspection fee for traction-driven freight elevators = (standard inspection fee * (1 + rated load coefficient + rated speed coefficient) + (max(floor/stop/door count) - 5) * 80) * inspection type coefficient * import coefficient. Note: If the maximum value of the three parameters (floor, stop and door count) is less than 5, it shall be calculated as 5.

搜集汇总

数据集介绍

特点

该数据集包含曳引驱动载货电梯监督检验收费计算相关数据，规模为33028条，每日更新。数据集用于根据电梯的具体情况计算检验费用，为电梯使用单位和检验机构提供收费依据。